*mydirectindustry

ULM-400C

Product catalog summary

Overview: This document provides technical specifications for the ULM-400C machine tool by Conprofe Machine Tool Co., Ltd., a wholly-owned subsidiary of Conprofe Technology Group Co., Ltd. It includes details on the machine's capabilities, components, and optional features.

Specifications:

Tool Magazine: The machine supports both non-ultrasonic and ultrasonic tool magazines, each with a capacity of 11 tools.
Tool Dimensions: Maximum tool diameter is 60 mm, maximum tool length is 75 mm, and maximum tool weight is 3 kg.
Power Supply: Operates on a three-phase AC, 380V/50Hz with a power capacity of 10 kVA.
Air Requirements: Requires air pressure between 0.5-0.7 MPa and total air consumption of over 100 L/min.
Machine Dimensions and Weight: The machine measures 1245 × 1750 × 2130 mm and weighs 2100 kg including accessories.

Controller: Equipped with HNC-918D SIEMENS 828D-280 CNC Controller.

Travel and Worktable:

X/Y/Z-Axis Travel: 400 × 400 × 150 mm.
Spindle Nose to Table: 185-335 mm.
Worktable Dimensions: 400 × 400 mm with a maximum load of 100 kg.

Feed Rate and Accuracy:

X/Y/Z-Axis Rapid Speed: 15 m/min.
X/Y/Z-Max. Feed Rate: 10 m/min.
Positioning Accuracy: 0.005 mm.
Repeatability: 0.003 mm.

Spindle:

Diameter: Φ100 mm.
Max. Speed: 40,000 rpm (short-duration), 32,000 rpm (long-duration).
Motor Power: 6 kW.
Motor Torque: 2.7 Nm.
Spindle Taper: HSK-E32.

Optional Features: Includes ultrasonic capabilities, minimum quantity lubrication (MQL), supercritical CO₂ spindle, and various accessories such as a coolant system, spindle chiller, and 5-axis simultaneous machining system.

Contact Information: Esther HU, Email: [email protected], Phone: +86-138 2607 9999, Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C.

Note: The information provided is not binding and the actual product and mutual agreement shall prevail.

Catalog excerpts

Ultrasonic PrecisionEngraving & Milling Center— — / //// ULM-400C Technical Data Standard Optional HNC-918D SIEMENS 828D-280 Spindle Nose to Table mm 185-335 Diameter Max. Speed (Short-Duration) Max. Speed (Long-Duration) Motor Power (Rated) Motor Torque (Rate) Spindle Taper Ultrasonic Minimum Quantity Lubrication (MQL) Ultrasonic + MQL Supercritical CO2 Spindle Tool Holding Capacity Max. Tool Diameter (Full) Max. Tool Length Max. Tool Weight Type MsceManeouS^ Power Supply Voltage Power Capacity Air Pressure Total Air Consumption Total Weight (incl. Accessories) Machine Size (L x w x H) Worktable Dimensions Max. Load T-Slot (No.xWidthxDistance) No. of Tools Non-Ultrasonic: 11 Ultrasonic: 11 mm 60 - Umbrella Type X/Y/Z-Axis Rapid Speed X/Y/Z-Max. Feed Rate X/Y/Z-Axis Motor Power X/Y/Z-Axis Positioning Accuracy mm 0.005 Conprofe Machine Tool Co., Ltd. // Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd.

Open the catalog to page 1

Coolant System Automatic Centralized Lubrication System Spindle Chiller Handwheel Blow Gun Electrical Cabinet Heat Exchanger LED Work Light Three-Color Alarm Light Door Safety Interlock High Precision 3D Probe Ultrasonic Amplitude Measuring Device Oil-Mist Collector 5-Axis Simultaneous Machining System (with rtcp Function) 4/5th Axis Rotary Table Non-Ultrasonic Extended Tool Magazine ETM-11 (C) Automatic Door Ultrasonic Extended Tool Magazine ETM-11 (C) Contact Tool Setter Floor Plans (Unit: mm) The information given is not binding. The actual product and mutual agreement shall prevail Contact:...

Open the catalog to page 2

All Conprofe catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list