*mydirectindustry

Catalogs
Conprofe
ULM-1200B

ULM-1200B

Product catalog summary

Overview: This document provides technical specifications for a machine tool manufactured by Conprofe Machine Tool Co., Ltd., a wholly-owned subsidiary of Conprofe Technology Group Co., Ltd. The document outlines various features, capabilities, and components of the machine.

Specifications:

Tool Holding Capacity: The machine can hold up to 25 non-ultrasonic and 25 ultrasonic tools.
Tool Dimensions: Maximum tool diameter is 60 mm, maximum tool length is 150 mm, and maximum tool weight is 5 kg.
Power Supply: Operates on a three-phase AC, 380V/50Hz with a power capacity of 20 kVA.
Air Requirements: Requires air pressure between 0.5-0.7 MPa and total air consumption of over 100 L/min.
Machine Dimensions and Weight: The machine measures 2990×3770×2900 mm and weighs 11000 kg including accessories.

Controller and Motion:

Controller: Equipped with a SIEMENS 828D-280 CNC Controller.
Axis Speed and Power: X/Y/Z-axis rapid speed is 24 m/min, with a maximum feed rate of 10 m/min and motor power of 3.1/4.3/3.1 kW respectively.
Accuracy: Positioning accuracy is 0.005 mm and repeatability is 0.003 mm.

Worktable and Travel:

Dimensions: Worktable size is 850x1250 mm with a maximum load capacity of 1000 kg.
T-Slot: Configured with 8-18 slots, each 100 mm apart.
Travel Range: X/Y/Z-axis travel is 800×1200×350 mm.

Spindle Specifications:

Speed and Power: Maximum short-duration speed is 30000 rpm, long-duration speed is 24000 rpm, with motor power rated at 7.5 kW and torque at 3.4 Nm.
Spindle Taper: HSK-E40, with optional ultrasonic and MQL capabilities.

Additional Features:

Includes a coolant system, automatic centralized lubrication, spindle chiller, handwheel, blow gun, high precision 3D probe, linear encoders, oil-mist collector, electrical cabinet heat exchanger, LED work light, three-color alarm light, door safety interlock, 4/5th axis rotary table, automatic door, and contact tool setter.

Contact Information: For further inquiries, contact Esther Hu at [email protected] or +86-138 2607 9999.

Note: The information provided is not binding and the actual product specifications may vary based on mutual agreement.

Catalog excerpts

Ultrasonic Precision Engraving & Milling Center— — / //// ULM-IBCJCJBTechnical Data CNC Controller X/Y/Z-Axis Travel Spindle Nose to Table Motor Power (Rated) kW Motor Torque (Rate) Nm Spindle Taper - Minimum Quantity Lubrication (MQL) -Ultrasonic + MQL - Dimensions Max. Load T-Slot (No.xWidthxDistance) Too.Magazin#' ' Tool Holding Capacity Max. Tool Diameter (Full) Max. Tool Length Max. Tool Weight Type MjsceNaneousP' Power Supply Voltage Power Capacity Air Pressure Total Air Consumption Total Weight (incl. Accessories) Machine Size (L x w x H) No. of Tools Non-Ultrasonic: 25 Ultrasonic: 25 mm 60 - Disc Type X/Y/Z-Axis Rapid Speed X/Y/Z-Max. Feed Rate X/Y/Z-Axis Motor Power X/Y/Z-Axis Positioning Accuracy X/Y/Z-Axis Repeatability Accuracy Grade Conprofe Machine Tool Co., Ltd. // Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd.

Open the catalog to page 1

Coolant System Automatic Centralized Lubrication System Spindle Chiller Handwheel Blow Gun Electrical Cabinet Heat Exchanger LED Work Light Three-Color Alarm Light Door Safety Interlock High Precision 3D Probe High Precision Linear Encoders Oil-Mist Collector 4/5th Axis Rotary Table Automatic Door Contact Tool Setter Floor Plans (Unit: mm) The information given is not binding. The actual product and mutual agreement shall prevail Contact: Esther HU +86-138 2607 9999 E-mail: [email protected] Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C...

Open the catalog to page 2

All Conprofe catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list