*mydirectindustry

Catalogs
Conprofe
ULM-1200A

ULM-1200A

Product catalog summary

Overview: This document provides technical specifications for the ULM-1200A machine tool by Conprofe Machine Tool Co., Ltd., a wholly-owned subsidiary of Conprofe Technology Group Co., Ltd. It includes details on tool capacity, power requirements, machine dimensions, and additional features.

Tool Capacity: The machine supports both non-ultrasonic and ultrasonic tools, with a capacity of 25 tools each. The maximum tool diameter is 60 mm, the maximum tool length is 150 mm, and the maximum tool weight is 5 kg.

Power and Air Requirements: The machine operates on a three-phase AC power supply of 380V/50Hz with a power capacity of 18/20/33 kVA. It requires an air pressure of 0.5-0.7 MPa and a total air consumption of more than 100 L/min.

Machine Specifications: The total weight of the machine, including accessories, is 11,000 kg, with dimensions of 2990×3770×2900 mm. It features a SIEMENS 828D-280 CNC Controller.

Axis Specifications: The X/Y/Z-axis rapid speed is 24 m/min, with a maximum feed rate of 10 m/min and motor power of 3.1/4.3/3.1 kW. Positioning accuracy is 0.005 mm, and repeatability is 0.003 mm.

Worktable and Travel: The worktable dimensions are 850x1250 mm, with a maximum load of 1000 kg. The T-slot configuration is 8-18×100 mm. The X/Y/Z-axis travel is 800×1200×350 mm, with a spindle nose to table distance of 150-500 mm.

Spindle Specifications: The spindle diameter is Φ100 mm, with a maximum short-duration speed of 40,000 rpm and a long-duration speed of 32,000 rpm. The motor power is rated at Y: 6 kW and motor torque at Y: 2.7 Nm. The spindle taper is HSK-E32.

Additional Features: The machine includes a coolant system, automatic centralized lubrication system, spindle chiller, handwheel, blow gun, high precision 3D probe, high precision linear encoders, oil-mist collector, electrical cabinet heat exchanger, LED work light, three-color alarm light, door safety interlock, 4/5th axis rotary table, automatic door, and contact tool setter.

Contact Information: For further inquiries, contact Esther Hu at [email protected] or +86-138 2607 9999. The address is No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C.

Disclaimer: The information provided is not binding, and the actual product and mutual agreement shall prevail.

Catalog excerpts

Ultrasonic Precision Engraving & Milling Center— — / //// ULM-'ISOtDATechnical Data CNC Controller X/Y/Z-Axis Travel Spindle Nose to Table Motor Power (Rated) kW Motor Torque (Rate) Nm Spindle Taper - Minimum Quantity Lubrication (MQL) -Ultrasonic + MQL - Dimensions Max. Load T-Slot (No.xWidthxDistance) Too.Magazin#' ' Tool Holding Capacity Max. Tool Diameter (Full) Max. Tool Length Max. Tool Weight Type MjsceNaneousP' Power Supply Voltage Power Capacity Air Pressure Total Air Consumption Total Weight (incl. Accessories) Machine Size (L x w x H) No. of Tools Non-Ultrasonic: 25 Ultrasonic: 25 mm 60 - Disc Type X/Y/Z-Axis Rapid Speed X/Y/Z-Max. Feed Rate X/Y/Z-Axis Motor Power X/Y/Z-Axis Positioning Accuracy X/Y/Z-Axis Repeatability Accuracy Grade Conprofe Machine Tool Co., Ltd. // Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd.

Open the catalog to page 1

Coolant System Automatic Centralized Lubrication System Spindle Chiller Handwheel Blow Gun Electrical Cabinet Heat Exchanger LED Work Light Three-Color Alarm Light Door Safety Interlock High Precision 3D Probe High Precision Linear Encoders Oil-Mist Collector 4/5th Axis Rotary Table Automatic Door Contact Tool Setter Floor Plans (Unit: mm) The information given is not binding. The actual product and mutual agreement shall prevail Contact: Esther HU +86-138 2607 9999 E-mail: [email protected] Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C...

Open the catalog to page 2

All Conprofe catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list