*mydirectindustry

Catalogs
Conprofe
ULH Conprofe Horizontal 5-Axis Simultaneous Machining Centers

ULH Conprofe Horizontal 5-Axis Simultaneous Machining Centers

Product catalog summary

Overview: This document provides technical specifications for the ULH Series of 5-axis machine tools manufactured by Conprofe Machine Tool Co., Ltd., a subsidiary of Conprofe Technology Group Co., Ltd. The series includes models ULH400-5AXIS, ULH500-5AXIS, ULH650-5AXIS, ULH800-5AXIS, ULH1000-5AXIS, and ULH1200-5AXIS.

Specifications:

Travel and Feed Rate: The X/Y/Z-axis travel varies across models, with rapid speeds ranging from 30 to 40 m/min. The feed rate for A and B axes is up to 20 r/min.
Worktable: The maximum load capacity and workpiece dimensions differ by model, with the largest model supporting up to 1,200 kg horizontally and a workpiece swing diameter of up to 1,200 mm.
Ultrasonic Spindle: Spindle speeds are programmable up to 20,000 rpm for most models, with motor power ranging from 22 to 35 kW.
Accuracy: Positioning accuracy for X/Y/Z axes is 0.007 mm, with repeatability of 0.004 mm. A/B-axis indexing accuracy is 8 seconds, with repeatability of 5 seconds.
Tool Magazine: Tool holding capacity is 24 tools, with an optional upgrade to 40. Maximum tool diameter is 80/150 mm, and tool change time is approximately 8 to 12 seconds.
Miscellaneous: Power supply requirements are three-phase AC, 380V/50Hz, with power capacity ranging from 50 to 100 kVA. Air pressure requirements are 0.55-0.7 MPa.

Controller: All models are equipped with the SIEMENS 840D sl CNC controller.

Dimensions and Weight: Machine sizes and total weights vary, with the largest model measuring 6,580×3,890×2,790 mm and weighing 24,000 kg.

Catalog excerpts

ULH Conprofe Horizontal 5-Axis Simultaneous Machining Centers-1

The information given is not binding. The actual product and mutual agreement shall prevail. Conprofe Machine Tool Co., Ltd. Contact: Esther HU +86-138 2607 9999 Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd. E-mail: [email protected] Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C

Open the catalog to page 1

ULH Conprofe Horizontal 5-Axis Simultaneous Machining Centers-2

ULH400-5AXIS ULH500-5AXIS Travel X/Y/Z-Axis Travel Spindle Center to Table Spindle Nose to Table Worktable Dimensions A-Axis Rotating Range B-Axis Rotating Range Max. Load (Horizontal) Max. Load (Tilt) Max. Workpiece Swing Diameter Workpiece Max. Height Feed Rate X/Y/Z-Axis Rapid Speed Feed Rate A-Axis Rotary Feed (Max.) B-Axis Rotary Feed (Max.) m/min m/min r/min r/min Ultrasonic Spindle Motor Power Motor Torque (Max.) Accuracy X/Y/Z-Axis Positioning Accuracy X/Y/Z-Axis Repeatability A-Axis Indexing Positioning Accuracy B-Axis Indexing Positioning Accuracy A-Axis Indexing Repeatability B-Axis...

Open the catalog to page 2

ULH Conprofe Horizontal 5-Axis Simultaneous Machining Centers-3

ULH650-5AXIS ULH800-5AXIS Travel X/Y/Z-Axis Travel Spindle Center to Table Spindle Nose to Table Worktable Dimensions A-Axis Rotating Range B-Axis Rotating Range Max. Load (Horizontal) Max. Load (Tilt) Max. Workpiece Swing Diameter Workpiece Max. Height Feed Rate X/Y/Z-Axis Rapid Speed Feed Rate A-Axis Rotary Feed (Max.) B-Axis Rotary Feed (Max.) m/min m/min r/min r/min Ultrasonic Spindle Motor Power Motor Torque (Max.) Accuracy X/Y/Z-Axis Positioning Accuracy X/Y/Z-Axis Repeatability A-Axis Indexing Positioning Accuracy B-Axis Indexing Positioning Accuracy A-Axis Indexing Repeatability B-Axis...

Open the catalog to page 3

ULH Conprofe Horizontal 5-Axis Simultaneous Machining Centers-4

ULH1000-5AXIS ULH1200-5AXIS Travel X/Y/Z-Axis Travel Spindle Center to Table Spindle Nose to Table Worktable Dimensions A-Axis Rotating Range B-Axis Rotating Range Max. Load (Horizontal) Max. Load (Tilt) Max. Workpiece Swing Diameter Workpiece Max. Height Feed Rate X/Y/Z-Axis Rapid Speed Feed Rate A-Axis Rotary Feed (Max.) B-Axis Rotary Feed (Max.) m/min m/min r/min r/min Ultrasonic Spindle Motor Power Motor Torque (Max.) Accuracy X/Y/Z-Axis Positioning Accuracy X/Y/Z-Axis Repeatability A-Axis Indexing Positioning Accuracy B-Axis Indexing Positioning Accuracy A-Axis Indexing Repeatability B-Axis...

Open the catalog to page 4

All Conprofe catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list