*mydirectindustry

UHT-500

Product catalog summary

Overview: This document provides technical specifications for a machine tool manufactured by Conprofe Machine Tool Co., Ltd., a wholly-owned subsidiary of Conprofe Technology Group Co., Ltd. The document outlines the machine's capabilities, dimensions, and additional features.

Specifications:

Tool Magazine: Arm type with a holding capacity of 21 tools. Maximum tool diameter is 60/80 mm, length is 200 mm, and weight is 3 kg.
Power Supply: Three-phase AC, 380V/50Hz with a power capacity of 15 kVA.
Air Requirements: Air pressure between 0.5-0.7 MPa and total air consumption greater than 100 L/min.
Machine Dimensions: Total weight including accessories is 3200 kg. Machine size is 1600×2430×2400 mm.

Controller: Options include Mitsubishi M80A, SIEMENS, or FANUC CNC controllers.

Travel and Worktable:

X/Y/Z-Axis Travel: 500×400×320 mm.
Spindle Nose to Table: 180-500 mm.
Spindle Center to Z-Axis Cover: 420 mm.
Max Load: 250 kg with T-Slot dimensions of 3×14×125 mm.

Feed Rate and Accuracy:

X/Y/Z-Axis Rapid Speed: 48/48/36 m/min.
X/Y/Z-Axis Motor Power: 1.5/1.5/3.0 kW.
Positioning Accuracy: 0.006 mm.
Repeatability: 0.004 mm.

Spindle:

Diameter: Φ120 mm.
Max Speed: 30000 rpm (short-duration), 24000 rpm (long-duration).
Motor Power: Rated at 5.5 kW, short-duration at 7.5 kW.
Motor Torque: Rated at 8.73 Nm, short-duration at 4.78 Nm.
Spindle Taper: BT30.

Additional Features: Includes an automatic centralized lubrication system, chip-flushing system, coolant system, Ethernet port, handwheel, high precision 3D probe, automatic door, disc-type oil-water separator, 4/5th axis rotary table, oil mist collector, blow gun, electrical cabinet heat exchanger, LED work light, three-color alarm light, door safety interlock, contact tool setter, add-on tool magazine (ATM-14), spindle chiller, and tool magazine flushing system.

Contact Information: Esther HU, Email: [email protected], Phone: +86-138 2607 9999, Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C.

Note: The information provided is not binding and the actual product and mutual agreement shall prevail.

Catalog excerpts

Ultrasonic High-Efficiency Drilling & Tapping Center UHT-SOO Standard Spindle Nose to Table mm Spindle Center to Z-Axis Cover mm Diameter Max. Speed (Short-Duration) Max. Speed (Long-Duration) Motor Power (Rated / Short-Duration) Motor Torque (Rated / Short-Duration) Spindle Taper Ultrasonic Spindle-Through MQL Ultrasonic + Spindle-Through MQL Supercritical CO2 Spindle Dimensions Max. Load T-Slot (No. x Width x Distance) Tool Holding Capacity Max. Tool Diameter (Full / Partial) Max. Tool Length Max. Tool Weight Type Mjsc^AaneouS^' Power Supply Voltage Power Capacity Air Pressure Total Air Consumption Total Weight (incl. Accessories) Machine Size (L x w x H) Area Size (L x w x H) W"" X/Y/Z-Axis Rapid Speed X/Y/Z-Axis Motor Power Feed Rate X/Y/Z-Axis Positioning Accuracy mm Accuracy Grade - Conprofe Machine Tool Co., Ltd. // Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd.

Open the catalog to page 1

Automatic Centralized Lubrication System Chip-Flushing System Coolant System Ethernet Port Handwheel Standard Configurations Blow Gun Electrical Cabinet Heat Exchanger LED Work Light Three-color Alarm Light Door Safety Interlock High Precision 3D Probe Automatic Door Disc-Type Oil-Water Separator 4/5th Axis Rotary Table Oil Mist Collector Contact Tool Setter Add-On Tool Magazine (ATM-14) Spindle Chiller Tool Magazine Flushing System Non-Ultrasonic Floor Plans (Unit: mm) The information given is not binding. The actual product and mutual agreement shall prevail Contact: Esther HU +86-138 2607...

Open the catalog to page 2

All Conprofe catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list