*mydirectindustry

UHT-1200

Product catalog summary

Overview: This document provides technical specifications for a machine tool manufactured by Conprofe Machine Tool Co., Ltd., a wholly-owned subsidiary of Conprofe Technology Group Co., Ltd. The document outlines the machine's capabilities, dimensions, and additional features.

Specifications:

Tool Magazine: Arm type with a tool holding capacity of 21 tools. Maximum tool diameter is 60/80 mm, maximum tool length is 200 mm, and maximum tool weight is 3 kg.
Power Supply: Three-phase AC, 380V/50Hz with a power capacity of 15 kVA.
Air Requirements: Air pressure between 0.5-0.7 MPa and total air consumption greater than 100 L/min.
Machine Dimensions: Total weight including accessories is 6000 kg, with machine size dimensions of 2930×2980×2700 mm.

Controller: Options include Mitsubishi M80A, SIEMENS, or FANUC CNC controllers.

Travel and Worktable:

X/Y/Z-Axis Travel: 1200×650×370 mm.
Spindle Nose to Table: 180-550 mm.
Spindle Center to Z-Axis Cover: 660 mm.
Worktable Dimensions: 1300×600 mm with a maximum load of 400 kg.
T-Slot: 5 slots, each 18 mm wide and 125 mm apart.

Feed Rate and Accuracy:

X/Y/Z-Axis Rapid Speed: 48/48/36 m/min.
X/Y/Z-Axis Motor Power: 2.2/2.2/3.0 kW.
Positioning Accuracy: 0.008 mm.
Repeatability: 0.005 mm.

Spindle:

Diameter: Φ120 mm.
Max Speed: 30000 rpm (short-duration), 24000 rpm (long-duration).
Motor Power: Rated at 5.5 kW, short-duration at 7.5 kW.
Motor Torque: Rated at 8.73 Nm, short-duration at 4.78 Nm.
Spindle Taper: BT30.

Additional Features: Includes an automatic centralized lubrication system, chip-flushing system, coolant system, Ethernet port, handwheel, high precision 3D probe, automatic door, disc-type oil-water separator, 4/5th axis rotary table, oil-mist collector, blow gun, electrical cabinet heat exchanger, LED work light, three-color alarm light, door safety interlock, contact tool setter, add-on tool magazine (ATM-14), and spindle chiller.

Contact Information: Esther HU, Email: [email protected], Phone: +86-138 2607 9999, Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C.

Note: The information provided is not binding and the actual product and mutual agreement shall prevail.

Catalog excerpts

Ultrasonic High-Efficiency Drilling & Tapping Center / //// UHT-'ISOOTechnical Data Standard Optional Spindle Nose to Table mm Spindle Center to Z-Axis Cover mm Diameter Max. Speed (Short-Duration) Max. Speed (Long-Duration) Motor Power (Rated / Short-Duration) Motor Torque (Rated / Short-Duration) Spindle Taper Ultrasonic Spindle-Through MQL Ultrasonic + Spindle-Through MQL Supercritical CO2 Spindle JSSSV r Tool Holding Capacity Max. Tool Diameter (Full / Partial) Max. Tool Length Max. Tool Weight Type MsceManeouS^ Power Supply Voltage Power Capacity Air Pressure Total Air Consumption Total Weight (incl. Accessories) Machine Size (L x w x H) Area Size (L x w x H) Dimensions Max. Load T-Slot (No. x Width x Distance) Feed Rate X/Y/Z-Axis Rapid Speed X/Y/Z-Axis Motor Power X/Y/Z-Axis Positioning Accuracy mm 0.008 Conprofe Machine Tool Co., Ltd. // Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd.

Open the catalog to page 1

Automatic Centralized Lubrication System Chip-Flushing System Coolant System Ethernet Port Handwheel Standard Configurations Blow Gun Electrical Cabinet Heat Exchanger LED Work Light Three-Color Alarm Light Door Safety Interlock High Precision 3D Probe Automatic Door Disc-Type Oil-Water Separator 4/5th Axis Rotary Table Oil-Mist Collector Contact Tool Setter Add-On Tool Magazine (ATM-14) Spindle Chiller Non-Ultrasonic Floor Plans (Unit: mm) 2,980 The information given is not binding. The actual product and mutual agreement shall prevail Contact: Esther HU +86-138 2607 9999 E-mail: [email protected]...

Open the catalog to page 2

All Conprofe catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list