Specifications:
X/Y/Z Axis Travel: 520×520×460 mm
A/C Axis Swivel Range: ±120°/360°
Worktable Diameter: Φ500 mm
Max. Load: 300 kg
T-slot: 8×16 mm
Max. Workpiece Size: Φ520×400 mm

Feed Rate:
X/Y/Z Axis Rapid Speed: 20 m/min
A/C Axis Rapid Speed: 40/80 rpm

Accuracy:
X/Y/Z Axis Positioning Accuracy and Repeatability: High precision
A/C Positioning and Repeatability Accuracy: High precision

Control System:
SIEMENS 840Dsl

Tools:
Disc Type ATC System
Holding Capacity: 24 tools
Max. Tool Diameter: Φ120 mm
Max. Tool Length: 320 mm
Max. Tool Weight: 6 kg

Spindle:
Diameter: Φ170 mm
Max. Speed: 20,000 rpm
Spindle Taper: HSK-A63

Power and Miscellaneous:
Power Supply: Three-phase AC, 380V/50Hz
Power Capacity: 26 kVA
Required Air Pressure: 0.5-0.7 MPa
Total Air Consumption: 100 L/min
Total Weight: 10,000 kg
Machine Size: 2,220×3,217×2,800 mm

Additional Features:
High Precision 3D Probe, Laser Tool Setter, Ultrasonic Amplitude Measuring Instrument, Permanent Magnet Synchronous Electrical Spindle, Oil-mist Collector, Automatic Door, Coolant System, Centralized Automatic Lubrication System, Spindle Chiller, Contact Tool Setter, HEIDENHAIN Linear Encoders, Handwheel Controller, Electrical Cabinet Heat Exchanger, Blow Gun, LED Work Light, Three-color Alarm Light, Safety Interlock, 5-axis Simultaneous Machining (with RTCP Function), Anti-collision System.

Contact Information:
Web: www.conprofetech.cn
Email: [email protected]
Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C
Contact: Esther HU +86-138 2607 9999

Note: The information provided is not binding. Actual products and mutual agreement shall prevail. Reprinting requires written authorization from Conprofe.