*mydirectindustry

UGV-856

Product catalog summary

Overview: This document provides technical specifications for a machine tool produced by Conprofe Machine Tool Co., Ltd., a wholly-owned subsidiary of Conprofe Technology Group Co., Ltd. The machine is equipped with advanced features and options to enhance its performance and versatility.

Tool Magazine: The standard tool magazine has a capacity of 24 tools, with an optional upgrade to 30 tools. It supports a maximum tool diameter of Φ78/Φ120 mm, a maximum tool length of 300 mm, and a maximum tool weight of 8 kg.

Power and Air Requirements: The machine operates on a three-phase AC power supply of 380V/50Hz with a power capacity of 20 kVA. It requires an air pressure of 0.5-0.7 MPa and consumes more than 100 L/min of air.

Machine Dimensions and Weight: The machine's dimensions are 2350×2950×2550 mm, and it has a total weight of 5500 kg, including accessories.

Controller: The machine is equipped with a Mitsubishi M80B CNC controller.

Feed Rate and Motor Power: The X/Y/Z-axis rapid speed is 48/48/32 m/min, with a maximum feed rate of 10/10/10 m/min. The motor power for the X/Y/Z-axis is 2/2/3 kW.

Accuracy: The positioning accuracy for the X/Y/Z-axis is 0.006 mm, with a repeatability of 0.004 mm, classified under the UP accuracy grade.

Worktable: The worktable dimensions are 1000×500 mm, with a maximum load capacity of 450 kg. It features T-slots with specifications of 4×18×124 mm.

Travel and Spindle: The X/Y/Z-axis travel is 800×550×600 mm. The spindle nose to table distance ranges from 130-730 mm, and the spindle center to column guide is 575 mm. The spindle has a diameter of Φ140 mm, with a maximum speed of 15000 rpm (direct-driven) for short-duration and 12000 rpm for long-duration. The motor power is rated at 5.5 kW, with a short-duration power of 7.5 kW, and a torque of 35 Nm, increasing to 47.7 Nm for short-duration. The spindle taper is BT40.

Optional Features: The machine offers optional features such as ultrasonic capabilities, minimum quantity lubrication (MQL), and a combination of ultrasonic and MQL.

Miscellaneous Features: The machine includes a coolant system, automatic centralized lubrication system, handwheel, blow gun, oil-mist collector, 4/5th axis rotary table, contact tool setter, high precision 3D probe, automatic door, electrical cabinet heat exchanger, LED work light, three-color alarm light, door safety interlock, disc-type oil-water separator, spindle chiller, chip conveyor, and water gun.

Contact Information: For further inquiries, contact Esther HU at +86-138 2607 9999 or via email at [email protected]. The company is located at No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C.

Note: The information provided is not binding, and the actual product specifications and mutual agreements shall prevail.

Catalog excerpts

Ultrasonic-Green Vertical Machining Center UGV-BSS Technical Data Standard Spindle Nose to Table mm Spindle Center to Column Guide mm Motor Power (Rated / Short-Duration) kW Motor Torque (Rated / Short-Duration) Nm Spindle Taper - Minimum Quantity Lubrication (MQL) -Ultrasonic + MQL - 0150 20000 (Electric Spindle) 15000 (Direct-Driven) 5.5/7.5 35/47.7 BT40 Optional Optional Optional Dimensions Max. Load T-Slot (No. x Width x Distance) TjjjMggjziner ' No. of Tools 24 (Standard) 30 (Optional) mm 078/0120 - Disc Type Tool Holding Capacity Max. Tool Diameter (Full / Partial) Max. Tool Length Max. Tool Weight Type Power Supply Voltage Power Capacity Air Pressure Total Air Consumption Total Weight (incl. Accessories) Machine Size (l x w x h) Feed Rate X/Y/Z-Axis Rapid Speed X/Y/Z-Axis Max. Feed Rate X/Y/Z-Axis Motor Power X/Y/Z-Axis Positioning Accuracy mm Accuracy Grade - Conprofe Machine Tool Co., Ltd. // Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd

Open the catalog to page 1

Coolant System Automatic Centralized Lubrication System Handwheel Blow Gun Oil-Mist Collector 4/5th Axis Rotary Table Contact Tool Setter High Precision 3D Probe Automatic Door Electrical Cabinet Heat Exchanger LED Work Light Three-Color Alarm Light Door Safety Interlock Disc-Type Oil-Water Separator Spindle Chiller Chip Conveyor Water Gun Floor Plans (Unit: mm) 2,950 The information given is not binding. The actual product and mutual agreement shall prevail Contact: Esther HU +86-1 38 2607 9999 E-mail: [email protected] Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development...

Open the catalog to page 2

UGV-856

UGV-856

Catalog excerpts

All Conprofe catalogs and technical brochures

Archived catalogs