*mydirectindustry

UGV-500

1 / 2 PagesView full catalog

UGV-500

Product catalog summary

Specifications

Tool Magazine: Standard tool holding capacity is 24 tools with an optional capacity of 30 tools. Maximum tool diameter is Φ75/Φ150, maximum tool length is 300 mm, and maximum tool weight is 8 kg. The type is Disc Type.
Power Supply: Three-Phase AC, 380V/50Hz with a power capacity of 18 kVA. Air pressure required is 0.5-0.7 MPa with total air consumption of >100 L/min.
Machine Dimensions and Weight: The machine size is 2120×2380×2850 mm and the total weight including accessories is 3800 kg.
CNC Controller: Mitsubishi M80A.

Performance

Feed Rate: X/Y/Z-Axis rapid speed is 48 m/min, and the maximum feed rate is 10 m/min. Motor power for X/Y/Z-Axis is 1.5/1.5/3.0 kW.
Accuracy: Positioning accuracy for X/Y/Z-Axis is 0.006 mm, and repeatability is 0.003 mm.

Worktable

Dimensions: 650×400 mm with a maximum load of 300 kg. T-Slot configuration is 3×14×110 mm.

Travel

X/Y/Z-Axis Travel: 550/400/450 mm. Spindle nose to table distance is 140-590 mm, and spindle center to column guide is 409 mm.

Spindle

Specifications: Diameter is Φ140 with a maximum speed of 15000 rpm (direct-driven) for short-duration and 12000 rpm for long-duration. Motor power is 5.5 kW with a torque of 17.5 Nm. Spindle taper is BT40.
Optional Features: Ultrasonic, Minimum Quantity Lubrication (MQL), and Ultrasonic + MQL.

Miscellaneous

Includes coolant system, automatic centralized lubrication system, handwheel, blow gun, oil-mist collector, 4/5th axis rotary table, contact tool setter, high precision 3D probe, automatic door, electrical cabinet heat exchanger, LED work light, three-color alarm light, door safety interlock, disc-type oil-water separator, spindle chiller, chip conveyor, and water gun.

Catalog excerpts

Technical Data CNC Controller Spindle Nose to Table mm Spindle Center to Column Guide mm Motor Power (Rated / Short-Duration) kW Motor Torque (Rated / Short-Duration) Nm Spindle Taper - 15000 (Direct-Driven) 20000 (Electric Spindle) 12000 (Direct-Driven) 16000 (Electric Spindle) 5.5 9/15 Minimum Quantity Lubrication (MQL) -Ultrasonic + MQL - Optional Optional Optional Optional Optional Optional Dimensions Max. Load T-Slot (No. x Width x Distance) Tool Holding Capacity Max. Tool Diameter (Full / Partial) Max. Tool Length Max. Tool Weight Type No. of Tools 24 (Standard) 30 (Optional) mm 075/0150 - Disc Type Feed Rate X/Y/Z-Axis Rapid Speed X/Y/Z-Axis Max. Feed Rate X/Y/Z-Axis Motor Power Mis^^llanj0^^ Power Supply Voltage Power Capacity Air Pressure Total Air Consumption Total Weight (incl. Accessories) Machine Size (L x w x H) X/Y/Z-Axis Positioning Accuracy mm Accuracy Grade - Conprofe Machine Tool Co., Ltd. // Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd.

Open the catalog to page 1

Coolant System Automatic Centralized Lubrication System Handwheel Blow Gun Oil-Mist Collector 4/5th Axis Rotary Table Contact Tool Setter High Precision 3D Probe Automatic Door Electrical Cabinet Heat Exchanger LED Work Light Three-Color Alarm Light Door Safety Interlock Disc-Type Oil-Water Separator Spindle Chiller Chip Conveyor Water Gun Floor Plans (Unit: mm) The information given is not binding. The actual product and mutual agreement shall prevail Contact: Esther HU +86-138 2607 9999 E-mail: [email protected] Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone,...

Open the catalog to page 2

All Conprofe catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list