*mydirectindustry

Catalogs
Conprofe
UGT Conprofe Drilling & Tapping Centers

UGT Conprofe Drilling & Tapping Centers

Product catalog summary

Overview: This document provides technical specifications for the UGT Series machine tools, including models UGT-500, UGT-700, and UGT-1200, manufactured by Conprofe Machine Tool Co., Ltd., a subsidiary of Conprofe Technology Group Co., Ltd.

Specifications:

Travel: X/Y/Z-Axis Travel for UGT-500 is 48/48/36 mm, UGT-700 is 48/48/36 mm, and UGT-1200 is 48/48/36 mm.
Worktable: Dimensions vary with UGT-500 at 500×400×320 mm, UGT-700 at 700×400×320 mm, and UGT-1200 at 1,200×650×370 mm. Max load is 250 kg for UGT-500 and UGT-700, and 400 kg for UGT-1200.
Spindle: All models have a spindle diameter of Φ100 mm, max speed of 24,000 rpm (short-duration), and 19,200 rpm (long-duration). Motor power is 2.2/3.7 kW, and torque is 7/17.7 Nm.
Feed Rate: X/Y/Z-Axis rapid speed is 0.006 m/min for UGT-500 and 0.007 m/min for UGT-700 and UGT-1200.
Accuracy: Positioning accuracy is 0.006 mm for UGT-500 and 0.007 mm for UGT-700 and UGT-1200. Repeatability is 0.004 mm for all models.
Tool Magazine: Tool holding capacity is 21 tools with a max tool diameter of 60/80 mm and max tool length of 200 mm.
Miscellaneous: Power supply voltage is Three-Phase AC, 380V/50Hz with a power capacity of 15 kVA. Air pressure required is 0.5-0.7 MPa.

Standard and Optional Configurations:

Standard configurations include a high precision 3D probe, automatic door, disc-type oil-water separator, and more.
Optional configurations include a 4/5th axis rotary table, oil-mist collector, and add-on tool magazine (ATM-14).

Contact Information: For further inquiries, contact Esther Hu at [email protected] or +86-138 2607 9999.

Catalog excerpts

UGT Conprofe Drilling & Tapping Centers-1

The information given is not binding. The actual product and mutual agreement shall prevail. Conprofe Machine Tool Co., Ltd. Contact: Esther HU +86-138 2607 9999 Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd. E-mail: [email protected] Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C

Open the catalog to page 1

UGT Conprofe Drilling & Tapping Centers-2

Spindle Nose to Table mm 180-500 180-500 180-550 SIEMENS / FANUC (Optional) SIEMENS / FANUC (Optional) SIEMENS / FANUC (Optional) Max. Tool Diameter (Full / Partial) mm

Open the catalog to page 2

UGT Conprofe Drilling & Tapping Centers-3

Standard Configurations Centralized Automatic Lubrication System Chip-Flushing System Coolant System Ethernet Port Handwheel Blow Gun Electrical Cabinet Heat Exchanger LED Work Light Three-Color Alarm Light Door Safety Interlock Optional Configurations High Precision 3D Probe Automatic Door Disc-Type Oil-Water Separator 4/5th Axis Rotary Table Oil-Mist Collector Contact Tool Setter Spindle Chiller Add-On Tool Magazine (ATM-14) Non-Ultrasonic Tool Magazine Flushing System

Open the catalog to page 3

All Conprofe catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list