*mydirectindustry

UGT-700

Product catalog summary

Overview: This document provides technical specifications and features of a machine tool from Conprofe Machine Tool Co., Ltd., a subsidiary of Conprofe Technology Group Co., Ltd. It includes details on the machine's capabilities, dimensions, and optional features.

Specifications:

Tool Magazine: Arm type with a capacity of 21 tools. Maximum tool diameter is 60/80 mm, length is 200 mm, and weight is 3 kg.
Power Supply: Three-phase AC, 380V/50Hz with a power capacity of 15 kVA.
Air Requirements: Air pressure between 0.5-0.7 MPa and total air consumption of over 100 L/min.
Machine Dimensions: Total weight including accessories is 3500 kg. Machine size is 2000×2490×2750 mm, and area size is 1600×2430×2400 mm.
Controller Options: Mitsubishi M80A, SIEMENS, or FANUC CNC controllers.

Performance:

Feed Rate: X/Y/Z-axis rapid speed is 48/48/36 m/min with motor power of 1.5/1.5/3.0 kW.
Accuracy: Positioning accuracy is 0.007 mm, and repeatability is 0.004 mm.
Worktable: Dimensions are 800×400 mm with a maximum load of 250 kg. T-slot configuration is 3×14×125 mm.
Travel: X/Y/Z-axis travel is 700×400×320 mm. Spindle nose to table distance is 180-500 mm, and spindle center to Z-axis cover is 410 mm.

Spindle:

Specifications: Diameter of 100 mm, maximum speed of 24000 rpm (short-duration) and 19200 rpm (long-duration). Motor power is 2.2/3.7 kW, and torque is 7/17.7 Nm.
Features: Spindle taper is BT30. Options include ultrasonic, spindle-through MQL, and supercritical CO₂ spindle.

Additional Features:

Automatic centralized lubrication system, chip-flushing system, coolant system, Ethernet port, handwheel, high precision 3D probe, automatic door, disc-type oil-water separator, 4/5th axis rotary table, oil-mist collector, blow gun, electrical cabinet heat exchanger, LED work light, three-color alarm light, door safety interlock, contact tool setter, add-on tool magazine (ATM-14), spindle chiller, and non-ultrasonic options.

Contact Information: Esther HU, email: [email protected], phone: +86-138 2607 9999. Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C.

Note: The information provided is not binding, and the actual product and mutual agreement shall prevail.

Catalog excerpts

Ultrasonic-GreenDrilling & Tapping Center^=y Technical Data Standard Optional Spindle Nose to Table mm Spindle Center to Z-Axis Cover mm Diameter Max. Speed (Short-Duration) Max. Speed (Long-Duration) Motor Power (Rated / Short-Duration) Motor Torque (Rated / Short-Duration) Spindle Taper Ultrasonic Spindle-Through MQL Ultrasonic + Spindle-Through MQL Supercritical CO2 Spindle tOPEEt ' Tool Holding Capacity Max. Tool Diameter (Full / Partial) Max. Tool Length Max. Tool Weight Type Mj^aejilaneoUW Power Supply Voltage Power Capacity Air Pressure Total Air Consumption Total Weight (incl. Accessories) Machine Size (L x w x H) Area Size (L x w x H) - Optional (Add-On) Dimensions Max. Load T-Slot (No. x Width x Distance) X/Y/Z-Axis Rapid Speed X/Y/Z-Axis Motor Power X/Y/Z-Axis Positioning Accuracy mm 0.007 Conprofe Machine Tool Co., Ltd. // Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd.

Open the catalog to page 1

Automatic Centralized Lubrication System Chip-Flushing System Coolant System Ethernet Port Handwheel Standard Configurations Blow Gun Electrical Cabinet Heat Exchanger LED Work Light Three-Color Alarm Light Door Safety Interlock High Precision 3D Probe Automatic Door Disc-Type Oil-Water Separator 4/5th Axis Rotary Table Oil-Mist Collector Contact Tool Setter Add-On Tool Magazine (ATM-14) Spindle Chiller Non-Ultrasonic Floor Plans (Unit: mm) The information given is not binding. The actual product and mutual agreement shall prevail Contact: Esther HU +86-138 2607 9999 E-mail: [email protected]...

Open the catalog to page 2

All Conprofe catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list