*mydirectindustry

UGT-500

Product catalog summary

Overview: This document provides technical specifications for the UGT-500 machine tool, a product of Conprofe Machine Tool Co., Ltd., a wholly-owned subsidiary of Conprofe Technology Group Co., Ltd.

Specifications:

Tool Magazine: Arm type with a capacity of 21 tools. Maximum tool diameter is 60/80 mm, length is 200 mm, and weight is 3 kg.
Power and Air Requirements: Operates on a three-phase AC, 380V/50Hz power supply with a capacity of 15 kVA. Requires air pressure of 0.5-0.7 MPa and total air consumption of >100 L/min.
Machine Dimensions and Weight: Total weight including accessories is 3200 kg. Machine size is 1600×2430×2400 mm.
Controller Options: Mitsubishi M80A, SIEMENS, or FANUC CNC controllers are available.
Travel and Worktable: X/Y/Z-axis travel is 500×400×320 mm. The worktable can handle a maximum load of 250 kg with dimensions of 620×400 mm.
Spindle Specifications: Spindle diameter is Φ100 mm with a maximum speed of 24000 rpm (short-duration) and 19200 rpm (long-duration). Motor power is 2.2/3.7 kW and torque is 7/17.7 Nm.

Features:

Standard features include an automatic centralized lubrication system, chip-flushing system, coolant system, Ethernet port, handwheel, high precision 3D probe, automatic door, disc-type oil-water separator, and more.
Optional features include ultrasonic spindle, spindle-through MQL, supercritical CO₂ spindle, and additional tool magazine (ATM-14).

Contact Information: For further inquiries, contact Esther Hu at [email protected] or +86-138 2607 9999. Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C.

Note: The information provided is not binding and the actual product and mutual agreement shall prevail.

Catalog excerpts

Spindle Nose to Table mm Spindle Center to Z-Axis Cover mm Motor Power (Rated / Short-Duration) kW Motor Torque (Rated / Short-Duration) Nm Spindle Taper - Ultrasonic + Spindle-Through MQL -Supercritical CO2 Spindle Tool Magazine^ r Tool Holding Capacity Max. Tool Diameter (Full / Partial) Max. Tool Length Max. Tool Weight Type Power Supply Voltage T-Slot (No. x Width x Distance) pcsxmmxmm 3x14x125 Feed Rate X/Y/Z-Axis Rapid Speed X/Y/Z-Axis Motor Power Total Air Consumption Limin Total Weight (incl. Accessories) kg X/Y/Z-Axis Positioning Accuracy mm Accuracy Grade - Conprofe Machine Tool Co., Ltd. // Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd

Open the catalog to page 1

Automatic Centralized Lubrication System Chip-Flushing System Coolant System Ethernet Port Handwheel Standard Configurations Blow Gun Electrical Cabinet Heat Exchanger LED Work Light Three-Color Alarm Light Door Safety Interlock High Precision 3D Probe Automatic Door Disc-Type Oil-Water Separator 4/5th Axis Rotary Table Oil-Mist Collector //// Contact Tool Setter Add-On Tool Magazine (ATM-14) Spindle Chiller Tool Magazine Flushing System Non-Ultrasonic Floor Plans (Unit: mm) The information given is not binding. The actual product and mutual agreement shall prevail Contact: Esther HU +86-1 38...

Open the catalog to page 2

All Conprofe catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list