*mydirectindustry

Catalogs
Conprofe
UGT-500 Conprofe Ultrasonic-Green Drilling and Tapping Center 20220512 VE2.0

UGT-500 Conprofe Ultrasonic-Green Drilling and Tapping Center 20220512 VE2.0

1 / 2 PagesView full catalog

UGT-500 Conprofe Ultrasonic-Green Drilling and Tapping Center 20220512 VE2.0

Product catalog summary

Specifications:

Travel: X/Y/Z Axis Travel: 500×400×360 mm; Spindle Nose to Table: 200-560 mm; Spindle Center to Z Axis Cover: 375 mm.
Worktable: Dimensions: 650×400 mm; Max Load: 250 kg; T-slot: 3×14×125 mm.
Feed Rate: X/Y/Z Axis Rapid Speed: 48/48/36 m/min; Motor Power: 1.5/1.5/3.0 kW.
Accuracy: Positioning Accuracy and Repeatability Accuracy are specified but not detailed.
Control System: Options include Mitsubishi M80A, FANUC 0i-MF (5), and SIEMENS 828D-280.

Tools:

Turret Type with Holding Capacity: 26/30/36.
Max Tool Diameter: Φ60/Φ80 mm; Max Tool Length: 200 mm; Max Tool Weight: 3 kg.

Spindle:

Standard: Diameter Φ100 mm, Speed 24,000 rpm, Motor Power 3.7/5.5 kW, Torque 14.1/21 Nm, Spindle Taper BT30.
Optional: Diameter Φ120 mm, Speed 30,000 rpm, Motor Power 5.5(Y)/7.5(△) kW, Torque 8.73(Y)/4.78(△) Nm, Spindle Taper BT30.

Miscellaneous:

Power Supply: Three-Phase AC, 380V/50Hz; Power Capacity: 15 kVA.
Required Air Pressure: 0.5-0.7 MPa; Total Air Consumption: ≥200 L/min.
Total Weight: 2,300 kg; Machine Size: 1,600×2,155×2,565 mm.

Additional Features:

Includes options like Automatic Door, 4th-/5th-Axis Rotary Table, Spindle Chiller, Oil-mist Collector, High Precision 3D Probe, and more.

Contact Information:

Website: www.conprofemachine.com
Email: [email protected]
Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C
Contact: Esther HU +86-138 2607 9999

Notes:

The information provided is not binding and actual products and mutual agreements shall prevail. Reprinting requires written authorization from Conprofe.

Catalog excerpts

UGT-500 Conprofe Ultrasonic-Green Drilling and Tapping Center 20220512 VE2.0-1

Control System Spindle Nose to Table Spindle Center to Z Axis Cover (Direct Attached Motor) (Built-in Motor) Motor Power (Rated / Short Time) Motor Torque (Rated / Short Time) Spindle Taper T-slot (No. x Width x Distance) Holding Capacity Max. Tool Diameter (Full / Partial) Turret Type Power Supply Power Capacity X/Y/Z Axis Positioning Accuracy X/Y/Z Axis Repeatability Accuracy Accuracy Grade Feed Rate X/Y/Z Axis Rapid Speed X/Y/Z Axis Motor Power Total Weight (Including Accessories) kg Machine Size (L x W x H) Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd.

Open the catalog to page 1

UGT-500 Conprofe Ultrasonic-Green Drilling and Tapping Center 20220512 VE2.0-2

Centralized Automatic Lubrication System Automatic Door Oil-mist Collector Electrical Cabinet Heat Exchanger Bottom Chip Flush System High Precision 3D Probe Coolant System Contact Tool Setter Disc Type Oil Water Separator Ethernet Interface Three-color Alarm Light Spindle Chiller Handwheel Controller Safety Interlock Floor Plan The information given are not binding. Actual products and mutual agreement shall prevail. Reprinting of any text and illustrations requires written authorization of Conprofe. E-mail: [email protected] Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development...

Open the catalog to page 2

All Conprofe catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list