The information given is not binding. The actual product and mutual agreement shall prevail. Conprofe Machine Tool Co., Ltd. Contact: Esther HU +86-138 2607 9999 Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd. E-mail: [email protected] Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C

Technical ParametersItem Unit Travel Spindle Nose to Table mm Spindle Center to Column Guide mm T-Slot (No.xWidthxDistance) pcsxmmx Motor Power (Rated / Short-Duration) kW Motor Torque (Rated / Short-Duration) Nm Spindle Taper - Minimum Quantity Lubrication (MQL) Ultrasonic + MQL Standard $140 15,000 (Direct-Driven) 12,000 (Direct-Driven) 5.5 17.5 BT40 Optional Optional Optional Optional $150 20,000 (Electrical Spindle) 16,000 (Electrical Spindle) 9/15 14.8/6 HSK-A63 Optional Optional Optional Feed Rate X/Y/Z-Axis Rapid Speed m/min X/Y/Z-Axis Max. Feed m/min X/Y/Z-Axis Motor Power kW X/Y/Z-Axis...

Spindle Nose to Table mm Spindle Center to Column Guide mm Max. Load T-Slot (No.xWidthxDistance) Motor Power (Rated / Short-Duration) kW Motor Torque (Rated / Short-Duration) Nm Spindle Taper - Minimum Quantity Lubrication (MQL) Ultrasonic + MQL Standard $140 15,000 (Direct-Driven) 12,000 (Direct-Driven) 5.5/7.5 35/47.7 BT40 Optional Optional Optional Optional $150 20,000 (Electrical Spindle) 15,000 (Direct-Driven) 5.5/7.5 35/47.7 BT40 Optional Optional Optional Feed Rate X/Y/Z-Axis Rapid Speed X/Y/Z-Axis Max. Feed X/Y/Z-Axis Motor Power Tool Magazine Tool Holding Capacity Max. Tool Diameter...

Item Unit Travel Spindle Nose to Table mm Spindle Center to Column Guide mm Dimensions Max. Load T-Slot (No.xWidthxDistance) Diameter Max. Speed (Short-Duration) Max. Speed (Long-Duration) Motor Power (Rated / Short-Duration) Motor Torque (Rated / Short-Duration) Spindle Taper Ultrasonic Minimum Quantity Lubrication (MQL) Ultrasonic + MQL Standard $150 12,000 (Direct-Driven) 9,600 (Direct-Driven) 7.5/11 35.8/70 BT40 Optional Optional Optional Feed Rate X/Y/Z-Axis Rapid Speed X/Y/Z-Axis Positioning Accuracy X/Y/Z-Axis Repeatability Tool Magazine Tool Holding Capacity Tools Max. Tool Diameter (Full...

Spindle Nose to Table mm Spindle Center to Column Guide mm Dimensions Max. Load T-Slot (No.xWidthxDistance) Max. Speed (Short-Duration) Max. Speed (Long-Duration) Motor Power (Rated / Short-Duration) Motor Torque (Rated / Short-Duration) Spindle Taper Ultrasonic Minimum Quantity Lubrication (MQL) Ultrasonic + MQL 12,000 (Direct-Driven) 9,600 (Direct-Driven) 11/15 52.5/95.5 BT40 Optional Optional Optional 15,000 (Direct-Driven) 12,000 (Direct-Driven) 9/11 57.3/70 BT40 Optional Optional Optional 18,000 (Electrical Spindle) 14,400 (Electrical Spindle) Y:6/7.5 A:11/13.75 Y:32.5/42.9 A:18.8/24.2 HSK-A63...

Coolant System • • • Centralized Automatic Lubrication System • • • Electrical Cabinet Heat Exchanger • • • Three-Color Alarm Light • • • Door Safety Interlock • • • Two-Sided Chip Auger O O O & Front-End Chain Type Chip Conveyor Oil-Mist Collector 4/5th Axis Rotary Table Contact Tool Setter High Precision 3D Probe Automatic Door Disc-Type Oil-Water Separator Spindle Chiller Water