• Travel: X/Y/Z Axis Travel is 500×400×320 mm.
• Spindle: Spindle Nose to Table distance is 180-500 mm, and Spindle Center to Z Axis Cover is 420 mm.
• Worktable: Dimensions are 620×400 mm, with a maximum load of 250 kg and T-slot configuration of 3×14×125 mm.
• Feed Rate: X/Y/Z Axis Rapid Speed is 48/48/36 m/min, with motor power of 1.5/1.5/3.0 kW.
• Accuracy: Positioning accuracy is 1,600 mm, and repeatability accuracy is 2,430 mm.

• Automatic Door
• 4th-/5th-Axis Rotary Table
• Contact Tool Setter
• Spindle Chiller
• Oil-mist Collector
• High Precision 3D Probe
• Disc Type Oil Water Separator
• Add-on Tool Magazine (ATM-14)
• Centralized Automatic Lubrication System
• Electrical Cabinet Heat Exchanger
• Coolant System
• Ethernet Interface
• Handwheel Controller
• Blow Gun
• Bottom Chip Flush System
• LED Work Light
• Three-color Alarm Light
• Safety Interlock

Website: www.conprofemachine.com
Email: [email protected]
Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C
Contact: Esther HU +86-138 2607 9999

The information provided is not binding. Actual products and mutual agreements shall prevail. Reprinting of any text and illustrations requires written authorization from Conprofe.