- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
Conprofe 5-Axis Gantry Machining Center
Conprofe 5-Axis Gantry Machining Center
- Travel: The X/Y/Z-axis travel varies across models, with dimensions ranging from 4,000×2,000×1,200 mm to 20,000×8,200×1,500 mm.
- Spindle: All models feature an HSK-A100 spindle taper with speeds up to 15,000 rpm and a maximum torque of 1,200 Nm for the A-axis and 1,100 Nm for the C-axis.
- Worktable: Dimensions range from 4,000×2,000 mm to 20,000×8,000 mm, with T-slot configurations varying by model.
- Accuracy: Positioning accuracy ranges from 0.015 mm to 0.025 mm, and repeatability ranges from 0.008 mm to 0.020 mm.
- Tool Magazine: Capacity is typically 40 tools, with an optional increase to 60 tools.
- Miscellaneous: Machines operate on a three-phase AC, 380V/50Hz power supply, with power capacities ranging from 65 kVA to 115 kVA.
- Standard Configurations: Include a coolant system, centralized automatic lubrication, spindle chiller, contact tool setter, and more.
- Optional Configurations: Include an ultrasonic machining system, high precision probe, oil-mist collector, laser tool setter, and through-spindle cooling unit.
Catalog excerpts
The information given is not binding. The actual product and mutual agreement shall prevail. Conprofe Machine Tool Co., Ltd. Contact: Esther HU +86-138 2607 9999 Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd. E-mail: [email protected] Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C Website Direct Industry
Open the catalog to page 1
X/Y/Z-Axis Travel Distance between Two Columns Spindle Nose to Table Spindle Center to Table T-Slot (No.×Width×Distance) Spindle Taper Motor Power Output Torque Cutting Speed X/Y/Z-Axis Rapid Speed X/Y/Z-Axis Positioning Accuracy X/Y/Z-Axis Repeatability Tool Holding Capacity Max. Tool Diameter (Full / Partial) Total Tool Weight Chain Type Chain Type Power Supply Voltage Power Capacity Machine Size (L×W×H) Item Travel Tool Magazine
Open the catalog to page 2
X/Y/Z-Axis Travel Distance between Two Columns Spindle Nose to Table Spindle Center to Table T-Slot (No.×Width×Distance) Spindle Taper Motor Power Output Torque Cutting Speed X/Y/Z-Axis Rapid Speed X/Y/Z-Axis Positioning Accuracy X/Y/Z-Axis Repeatability Tool Holding Capacity Max. Tool Diameter (Full / Partial) Total Tool Weight Chain Type Chain Type Power Supply Voltage Power Capacity Machine Size (L×W×H) Item Travel Tool Magazine
Open the catalog to page 3
X/Y/Z-Axis Travel Distance between Two Columns Spindle Nose to Table Spindle Center to Table T-Slot (No.×Width×Distance) Spindle Taper Motor Power Output Torque Cutting Speed X/Y/Z-Axis Rapid Speed X/Y/Z-Axis Positioning Accuracy X/Y/Z-Axis Repeatability Tool Holding Capacity Max. Tool Diameter (Full / Partial) Total Tool Weight Chain Type Chain Type Power Supply Voltage Power Capacity Machine Size (L×W×H) Item Travel Tool Magazine
Open the catalog to page 4
X/Y/Z-Axis Travel Distance between Two Columns Spindle Nose to Table Spindle Center to Table T-Slot (No.×Width×Distance) Spindle Taper Motor Power Output Torque Cutting Speed X/Y/Z-Axis Rapid Speed X/Y/Z-Axis Positioning Accuracy X/Y/Z-Axis Repeatability Tool Holding Capacity Max. Tool Diameter (Full / Partial) Total Tool Weight Chain Type Chain Type Power Supply Voltage Power Capacity Machine Size (L×W×H) Item Travel Tool Magazine
Open the catalog to page 5
Travel X/Y/Z-Axis Travel Distance between Two Columns Spindle Nose to Table Spindle Center to Table T-Slot (No.×Width×Distance) Spindle Taper Motor Power Output Torque Cutting Speed X/Y/Z-Axis Rapid Speed X/Y/Z-Axis Positioning Accuracy X/Y/Z-Axis Repeatability Tool Holding Capacity Max. Tool Diameter (Full / Partial) Total Tool Weight Chain Type Chain Type Chain Type Power Supply Voltage Power Capacity Machine Size (L×W×H) Tool Magazine
Open the catalog to page 6
Standard Configurations Coolant System Centralized Automatic Lubrication System Spindle Chiller Contact Tool Setter HEIDENHAIN Linear Encoders Electrical Spindle Handwheel Blow Gun Electrical Cabinet Heat Exchanger LED Work Light Three-Color Alarm Light Door Safety Interlock 5-Axis Simultaneous Machining System (with RTCP Function) Anti-Collision System Auto Chip Conveyor Ultrasonic Machining System Optional Configurations High Precision Probe Oil-Mist Collector Laser Tool Setter Through-Spindle Cooling Unit Ultrasonic Machining System
Open the catalog to page 7
Clamping Torque Swing Angle Measuring System Absolute Type Absolute Type Positioning Accuracy
Open the catalog to page 8
CONverging of Global Resources PROFEssional as Industry Leader Website: www.conprofecnc.com E-mail: Address: No.6, 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C 2024 Conprofe Technology Group Co., Ltd. All Rights Reserved. VE1.7 The information given is not binding. Actual products and mutual agreement shall prevail. Reprinting of any text and illustrations requires written authorization of Conprofe.
Open the catalog to page 10All Conprofe catalogs and technical brochures
ULV1250-5AXIS2 Pages
ULV1000-5AXIS2 Pages
ULV800-5AXIS2 Pages
ULV650-5AXIS2 Pages
ULV500-5AXIS2 Pages
ULV400-5AXIS2 Pages
ULV200-5AXIS2 Pages
ULM-1200C2 Pages
ULM-1200B2 Pages
ULM-1200A2 Pages
ULM-800C2 Pages
ULM-800B2 Pages
ULM-800A2 Pages
ULM-600C2 Pages
ULM-600B2 Pages
ULM-600A2 Pages
ULM-500B2 Pages
ULM-500A2 Pages
ULM-400C2 Pages
ULM-400B2 Pages
ULM-400A2 Pages
SPV1250-5AXIS2 Pages
SPV1000-5AXIS2 Pages
SPV800-5AXIS2 Pages
SPV650-5AXIS2 Pages
SPV500-5AXIS2 Pages
SPV400-5AXIS2 Pages
SPV200-5AXIS2 Pages
ULV1000-5AXIS2 Pages
SEV1000-5AXIS2 Pages
SEV800-5AXIS2 Pages
SEV650-5AXIS2 Pages
SEV500-5AXIS2 Pages
SEV350-5AXIS2 Pages
SEV200-5AXIS2 Pages
Archived catalogs
- Industrial press
- Milling tool
- CNC machining center
- Vertical CNC milling center
- Hydraulic press
- Chuck
- Solid milling cutter
- Chiller
- 3-axis CNC milling center
- Drilling tool
- Steel milling cutter
- Solid drill bit
- Metal milling cutter
- Clamping milling cutter
- Precision CNC milling center
- Automatic press
- 5-axis CNC milling center
- Milling cutter with cylindrical shank
- End mill
- Air chiller