CU6
CU6
- Optical Magnification: The CU6 offers different magnification levels with corresponding measurement ranges:
- 20X: 0.010 - 0.035 mm (0.00039 - 0.00138 inches)
- 10X: 0.035 - 0.110 mm (0.00138 - 0.00433 inches)
- 3X: 0.110 - 0.600 mm (0.00433 - 0.02362 inches)
- 1X: 0.400 - 3.500 mm (0.01575 - 0.13780 inches)
- 1/2X: 0.800 - 8.000 mm (0.03150 - 0.31496 inches)
- Optical Auto-Focus: 15 mm (0.59 inches)
- Object Tilt (1-Axis): ±18°
- Object Rotation (1-Axis): 360°
- Maximum Casing Dimensions: Diameter 55 mm (2.16 inches), Height 28 mm (1.10 inches)
Catalog excerpts
CU6 ElectroOptical Frame The CU6 is a total assembly (Single 3D sensor) of optics and computer hardware for production and quality control of small objects CU6 with the single axis, is one of four choices as the sensor part of the following systems: Drawing Die Shape Die Shape Wire&Rod Enameling Die
Open the catalog to page 1
Each Production&Quality Control System (see separate sheets) may contain several software Supervisors that carry out automatic control and monitoring of the Electro- Optical Frame CU6. The Supervisors control from one to several of the following OPTICAL MAGNIFICATION: Objective Measurement Measurement module: Range: Range: Maximum Casing: Diameter 55 mm 2.16" EO-Frame CU20 that covers the range from 0.8 - 56.0 mm (0.0315- 2,2047"). EO-Frames CU11 and CU4 that covers the range from 0.01- 8.00 mm (0.00039 - 0.3150"). Note that these specifications may be subject to change whithout furtether notice...
Open the catalog to page 2
- Measuring device
- Analysis software solution
- Measuring machine
- Windows software
- 3D software solution
- Measurement software
- Quality software
- Optical measurement system
- 2D software
- Parts measurement system
- Distance measurement system
- Geometry measuring instrument
- Control measurement system
- Diameter measurement system
- Production software
- Length measurement system
- 3D measurement system
- CAPM software
- Rugged measurement system
- Process measuring module