*mydirectindustry

TA184 Series

Product catalog summary

Section: Vibration Sensors

Product Overview: The TA184 Series is a dual output accelerometer with temperature and acceleration measurement capabilities. It features a side exit connector/cable with a sensitivity of 100 mV/g and 10 mV/°C.

Specifications:

Environmental: Operates within a temperature range of -40 to 250°F (-40 to 121°C) and offers maximum shock protection of 5,000 g, peak. It is IP68 sealed and submersible up to 200 ft. (60 m) for models TA184-2C/3C.
Physical: The sensor uses a PZT ceramic sensing element in shear mode, weighs 6.3 oz (180 grams), and is housed in 316L stainless steel. It mounts with an M8 captive bolt and has a resonant frequency of 1,380,000 CPM (23000 Hz).
Electrical: Requires a voltage source of 18-30 VDC and constant current excitation of 2-10 mA. It has a settling time of less than 2.5 seconds and an output impedance of less than 100 ohms.

Performance: The sensor has a dynamic range of ±50 g, peak, and a frequency response of 0.5-15000 Hz (±3dB) and 2.0-10000 Hz (±10%).

Ordering Information: Available in different configurations such as TA184-1A, TA184-2C, and TA184-3C, with options for cable termination and length.

Additional Features: The sensor is designed for high performance at a low cost and requires a multi-conductor cable and dual IEPE power.

Catalog excerpts

Dual Output Temperature/Acceleration, Side Exit Connector/Cable, 100 mV/g, 10 mV/°C Dual Output Accelerometers Section I - Vibration Sensors Requires Multi-Conductor Cable Product Features Temperature/Vibration Sensors 10 mV/˚C Actual Product Size Shown High Performance in a Low Cost Sensor Requires Multi-Conductor Cable and Dual IEPE Power Part Number Temperature Range Dynamic Range Temperature Measurement Range Temperature Output Maximum Shock Protection Settling Time Voltage Source (IEPE) Constant Current Excitation Output Impedance Bias Output Voltage Case Isolation Sensing Element PZT Ceramic Shear Mode Case Material (M8x1 Captive Stock Bolt) Product Cable Termination Options: L (M8x1 Captive Build Bolt) To Order 180 grams 316L Stainless Steel Connector (non-integral) Resonant Frequency (cable length in feet) Backed by our Unconditional Lifetime Warranty Page 56 Calibration Certificate Mounting Hardware (maximum armor length 100 ft.) Mounting Torque Ordering Information Sensing Structure Frequency Response (±3dB) Frequency Response (±10%)

Open the catalog to page 1

TA184 Series

TA184 Series

Catalog excerpts

All Connection Technology Center Inc. catalogs and technical brochures