TA178

TA178

Product catalog summary
Product Overview: The TA178 Series Dual Output Accelerometers are designed for vibration and temperature measurement. They feature a side exit connector/cable with a 100 mV/g sensitivity for acceleration and 10 mV/K for temperature.
Specifications:
  • Environmental: Operates in temperatures from -40 to 250°F (-40 to 121°C) with a maximum shock protection of 5,000 g. It is IP68 sealed and submersible up to 200 ft (60 m).
  • Physical: The sensor uses a PZT Ceramic sensing element in shear mode, weighs 6.3 oz (180 grams), and is made from 316L stainless steel. It mounts with an M8 captive bolt and has a resonant frequency of 1,200,000 CPM (20000 Hz).
  • Electrical: Requires a voltage source of 18-30 VDC and constant current excitation of 2-10 mA. It has a settling time of less than 2.5 seconds and an output impedance of less than 100 ohms.
Performance: The accelerometer has a dynamic range of ±50 g and a frequency response of 0.5-10000 Hz (±3dB) and 2.0-5000 Hz (±10%). The temperature measurement range is -40º to 212º F (-40º to 100º C).
Product Features: It includes a standard 3 Pin MIL connection, requires a multi-conductor cable and dual IEPE power, and is compatible with Commtest vbOnline™ and Bently Nevada™ SCOUT Series data collectors.
Ordering Information: Available in different configurations with options for cable termination and length.
See more

Catalog excerpts

TA178-1

Product Features Temperature Measurement Range of -40° to 212°F (-40° to 100°C) Standard 3 Pin MIL Connection Actual Product Size Shown Requires Multi-Conductor Cable and Dual IEPE Power Compatible with Commtest vbOnline™ Series and Bently Nevada™ SCOUT Series Data Collectors Dual Output Accelerometers Side Exit with M8 Captive Bolt Part Number Temperature Range Frequency Response (±3dB) Frequency Response (±10%) Dynamic Range Temperature Measurement Range Temperature Output Maximum Shock Protection Physical Sensing Element Sensing Structure Electrical Settling Time Voltage Source (IEPE) Constant Current Excitation Output Impedance Bias Output Voltage Case Isolation Shear Mode Case Material 180 grams 316L Stainless Steel Connector (non-integral) Resonant Frequency Mounting Hardware Mounting Torque Calibration Certificate Ordering Information Metric (M8x1 Captive Stock Bolt) Product TA178-3C - / (M8x1 Captive Build Bolt) To Order / (maximum armor length 100 ft.) (cable length in feet) Cable Termination Options: L Backed by our Unconditional Lifetime Warranty Page 55 Section I - Vibration Sensors Dual Output Temperature/Acceleration, M8 Captive Bolt, Side Exit Connector/Cable, 100 mV/g

 Open the catalog to page 1

All Connection Technology Center Inc. catalogs and technical brochures

  1. VT104 Series

    1  Page

  2. FLEXX Box

    1  Page

  3. SB152/SB252

    1  Page

  4. CT101

    1  Page

  5. TA102 Series

    1  Page

  6. TK124 Series

    1  Page

  7. TK120 Series

    1  Page

  8. TC124

    1  Page

  9. PM110-32

    1  Page

  10. TA184 Series

    1  Page

  11. LP922

    1  Page

  12. LP401

    1  Page

  13. LP354-M12D

    1  Page

  14. LP302-M12D

    1  Page

  15. LP258

    1  Page

  16. LP252

    1  Page

  17. LP204-M12D

    1  Page

  18. LP202-M12D

    1  Page

  19. LP204

    1  Page

  20. LP202

    1  Page

  21. SC901 Series

    1  Page

  22. SC200 Series

    1  Page

  23. LP822 Series

    1  Page

  24. VP Series

    1  Page

  25. TC120 Series

    1  Page

  26. HA602 Series

    1  Page

  27. CM362 Series

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.