• Signal conditioners are designed to identify transient faults and guard against failures between monitoring cycles.
• Approved for Class I, Division 2 hazardous locations.
• Operates within a humidity range of 0-95% relative, non-condensing.
• Features positive force terminal block contacts.
• Maximum frequency response ranges from 2 Hz to 20,000 Hz with a tolerance of +5%.
• Weighs 6.4 oz.
• Input power requirement is 24 to 32 VDC unregulated, with a maximum of 225 mA.
• Nominal power consumption is 100 mA.
• Maximum load resistance is 600 ohms.
• Isolation is rated at 1000 VDC.

• Accelerometer options include 100 mV/g, 50 mV/g, and 500 mV/g.
• Full scale range options include 0-1, 0-2, 0-5, 0-10, 0-20, 0-50, and 0-100.
• Units of measurement include IPS and mm/s, with options for Peak and RMS.
• High pass filter options range from 2 Hz to 100 Hz.
• Low pass filter options range from 100 Hz to 20,000 Hz.

• FM Approved for Division 2, non-incendive environments (FM3611), suitable for Class I, Division 2, Groups A, B, C, D.
• Operates in ambient temperatures from -40ºC to +80ºC with a temperature code of T5.
• Non-incendive qualification does not require the use of barriers.
• Safe location apparatus must not use or generate more than 250 V.

• Dynamic vibration output is available from BNC connectors.
• 4-20 mA output is compatible with SCADA, PLS, or DCS systems.

Products are built to order, with various configurations available based on the specified requirements.