Class I, Division 2/Zone 2 Loop Power Sensor, For Use In “Non-Arcing, Non-Sparking” Environments, Top Exit Connector/Cable, Acceleration, 4-20 mA Output ■±j II 3 G D C i Must Use “Class I, Division 2” CB190 Cable and D2Q Connector or CB922 Series Cable Adapter Product Features Continuous Monitoring in Hazardous Locations Acceleration 4-20 Output for Applications in Hazardous Locations Requires CB190 with D2Q or CB922 Series Connector (for non-integral cable versions) Non-Arcing, Non-Sparking Sensor for Class I, Division 2 Protection for Hazardous Locations Actual Product Size Shown P25/LP922-1B 2 Pin Connector LP922-3C - Armored Integral Cable Conductor Polarity Red (+) Loop Power mA Output Shield Cable Drain Wire Hazardous Area Sensors & Accessories Specifications Output, 4-20 mA Measurement Range Tolerances Standard Metric Specifications Physical Sensing Element Sensing Structure Weight (without cable) Case Material Standard Metric Shear Mode Settling Time (Turn on Time) @ Room Temp (68°F/20°C) Power Requirement (Loop Powered) Voltage Source Electrical Case Isolation Environmental Temperature Range Electromagnetic Sensitivity Sealing Mounting Hole Connector (LP922-1B) Integral Cable (LP922-2C) Armored Cable (LP922-3C) Mechanical 1/4-28 1/4 NPT (P25/LP922-1B) 2 Pin MIL-C-5015 Blue TPE Cable Armor Jacketed Cable Mounting Torque Supplied Accessories Mounting Hardware Calibration Certificate v, Read Before Purchasing: 1 Important information on Regulatory Approvals and Requirements on Page 331 Lifetime Warranty on Materials & Workmanshipwww.ctconline.com