Class I, Division 2/Zone 2 Loop Power Sensor, For Use In “Non-Arcing, NonSparking” Environments, Top Exit Connector/Cable, Velocity, 4-20 mA Output Must Use “Class I, Division 2” CB190 Cable and D2Q Connector or CB922 Series Cable Adapter Product Features Continuous Monitoring in Hazardous Locations Velocity 4-20 Output for Applications in Hazardous Locations Requires CB190 with D2Q or CB922 Series Connector (for non-integral cable versions) Non-Arcing, Non-Sparking Sensor for Class I, Division 2 II 3 G D Enables Vibration Alarms for Process Control Actual Product Size Shown (+) Loop Power mA Output (-) Common Integral Cable Conductor (+) Loop Power mA Output (-) Common Armored Integral Cable (+) Loop Power mA Output (-) Common Cable Drain Wire (+) Loop Power mA Output (-) Common Cable Drain Wire Hazardous Area Sensors & Accessories Specifications Output, 4-20 mA Measurement Range Tolerances 4 mA 20 mA Standard Metric See Selection Guide Specifications Physical Sensing Element Sensing Structure Weight (without cable) Case Material Mounting Hole Electrical Settling Time (Turn on Time) @ Room Temp (68ºF/20ºC) Power Requirement (Loop Powered) Voltage Source Electrical Case Isolation Environmental Temperature Range Electromagnetic Sensitivity Sealing Ordering Information Mounting Hardware Calibration Certificate All Products Are Built To Order PZT Ceramic Shear Mode 3.7 oz 105 grams 316L Stainless Steel 1/4-28 1/4 NPT (P25/LP822-1B) 2 Pin MIL-C-5015 Blue TPE Cable Armor Jacketed Cable Connector (LP822-1B) Integral Cable (LP822-2C) Armored Cable (LP822-3C) Mechanical Mounting Torque Supplied Accessories Measurement Range Range Type / Armor Length (Integral) -Z Cable Length (Integral) 2C = Integral Cable 3C = Armored Integral Cable Read Before Purchasing: Important information on Regulatory Approvals and Requirements on Page 331 Lifetime Warranty on Materials & Workmanship (Custom lengths available upon request) Note: 1B Option Does Not Include Cable (Custom lengths available