LP401
1 / 1 PageView full catalog
LP401
Product catalog summary
Product Overview
The LP401 Series sensors are dual output devices designed for loop power applications, providing both velocity and dynamic velocity measurements. They feature a top exit connector or cable and are built to order, ensuring customization for specific needs.
The LP401 Series sensors are dual output devices designed for loop power applications, providing both velocity and dynamic velocity measurements. They feature a top exit connector or cable and are built to order, ensuring customization for specific needs.
Specifications
- Physical Characteristics: The sensors use a PZT ceramic sensing element in shear mode, housed in a 316L stainless steel case. They weigh 3.7 oz (105 grams) without the cable.
- Mechanical Specifications: The mounting torque ranges from 2 to 5 ft. lbs. (2.7 to 6.8 Nm). The sensors come with mounting hardware, including a 1/4-28 stud and an M6x1 adapter stud.
- Electrical Specifications: The sensors operate on a loop power voltage source of 12-28 VDC, with a settling time of less than 60 seconds at room temperature. They offer a 4-20 mA output with tolerances of ±5% at 4 mA and ±10% at 20 mA.
- Environmental Specifications: The sensors are rated for temperatures from -40 to 185°F (-40 to 85°C) and are IP68 sealed, allowing submersion up to 200 ft. (60 m).
Product Features
- Continuous protection with dynamic outputs for diagnostics.
- No IEPE sensor power required.
- Outputs compatible with PLC, DCS, and SCADA systems.
Ordering Information
The sensors are available with different connector and cable options, including a 3-pin MIL-C-5015 connector, integral cable, and armored cable. Cable and armor lengths are customizable, with standard lengths ranging from 10 ft. (3 m) to 100 ft. (30 m).
The sensors are available with different connector and cable options, including a 3-pin MIL-C-5015 connector, integral cable, and armored cable. Cable and armor lengths are customizable, with standard lengths ranging from 10 ft. (3 m) to 100 ft. (30 m).
See more
Catalog excerpts
Dual Output Sensor, Loop Power 4-20 mA, Velocity, Dynamic Velocity, Top Exit Connector/Cable Product Features- Offers Continuous Protection Plus Dynamic Outputs for Diagnostics IEPE sensor power not required 0 4-20 mA Velocity and Dynamic Velocity Outputs 0 Analytical Tool Actual Product Size Shown Outputs to PLC, DCS, SCADA Connector Pin Polarity A (+) Loop Power mA Output C (+) Dynamic Velocity Output Loop Power Acceleration & Velocity Sensors Lifetime Warranty on Materials & Workmanship Page 323 • 800-999-5290
Open the catalog to page 1All Connection Technology Center Inc. catalogs and technical brochures
VT104 Series1 Page
FLEXX Box1 Page
SB152/SB2521 Page
CT1011 Page
TA102 Series1 Page
TK124 Series1 Page
TK120 Series1 Page
TC1241 Page
PM110-321 Page
PMX9000 Series1 Page
PMX1000 Series1 Page
TA184 Series1 Page
TA1781 Page
LP9221 Page
LP822-XXX-5XC1 Page
LP354-M12D1 Page
LP302-M12D1 Page
LP2581 Page
LP2521 Page
LP204-M12D1 Page
LP202-M12D1 Page
LP2041 Page
LP2021 Page
SC901 Series1 Page
SC200 Series1 Page
LP822 Series1 Page
VP Series1 Page
TC120 Series1 Page
HA602 Series1 Page
CM362 Series1 Page
Related Searches
- Fitting
- Power supply unit
- DC power supply
- Display module
- Electrical cable
- Screw-in fitting
- Data connector
- Temperature probe
- Pneumatic fitting
- Rectangular housing
- Circular connector
- Proximity switch
- Wall-mount box
- Junction block
- Socket electrical connector
- Calibration system
- Acceleration sensor
- Terminal box
- Single-output power supply
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.