Product Overview
The document details the features and specifications of the PRO LINE Loop Power Acceleration & Velocity Sensors, specifically the LP204 model. These sensors are designed to continuously monitor and protect important machinery by transmitting vibration signals over long distances without signal loss. They offer customizable settings to focus on critical frequencies.

Product Features

• Loop Power Sensor with a 4-20 mA output and side exit M12 connector.
• Capable of monitoring vibration with a current proportional to vibration levels.
• Customizable frequency settings to target specific ranges.

Ordering Information
The LP204 model offers various measurement ranges and frequency options, with specific codes for ordering:

• Measurement Range: Options from 0-0.5 IPS to 0-5 IPS.
• Frequency Range: Options from 600-60,000 CPM to 180-300,000 CPM.
• Stud Type: M6x1 or 1/4-28.
• Output Type: RMS or Peak.

Specifications

• Physical: The sensor uses a PZT ceramic sensing element in shear mode, weighs 140 grams, and is housed in 316L stainless steel.
• Mechanical: Mounting torque ranges from 2 to 5 ft. lbs., with supplied mounting hardware.
• Electrical: Operates on a 15-30 VDC power source with a settling time of less than 30 seconds at room temperature.
• Environmental: The sensor operates within a temperature range of -40 to 185°F and is CE certified with IP68 sealing.

Connector Details
The LP204-M12 series uses a 4-pin M12 connector with specific pin polarity assignments for signal/power and common connections.

Additional Information
All products are built to order, ensuring customization and precision for specific applications.