LP202-M12D
LP202-M12D
- Loop Power Sensor with velocity measurement capabilities.
- 4-20 mA output for continuous monitoring and protection of important machinery.
- Signals can be transmitted over long distances without signal loss.
- Customizable settings to focus on important frequencies.
- Measurement Range: Options from 0-0.5 IPS to 0-5 IPS.
- Frequency Range: Options from 600-60,000 CPM to 180-600,000 CPM.
- Stud Type: M6x1 or 1/4-28.
- Range Type: RMS or Peak.
- Sensing Element: PZT Ceramic.
- Sensing Structure: Shear Mode.
- Weight: 2.9 oz (82 grams).
- Case Material: 316L Stainless Steel.
- Mounting: 1/4-28 with a 4 Pin M12 connector.
- Mounting Torque: 2 to 5 ft. lbs. (2.7 to 6.8 Nm).
- Supplied Accessories: Includes mounting hardware and calibration certificate.
- Output: 4-20 mA with tolerances of ±5% at 4 mA and ±10% at 20 mA.
- Settling Time: Less than 30 seconds at room temperature (68º F/20º C).
- Power Requirement: 15-30 VDC.
- Electrical Case Isolation: Greater than 108 ohm.
- Temperature Range: -40 to 185°F (-40 to 85°C).
- Electromagnetic Sensitivity: CE certified.
- Sealing: IP68 rated.
- A (+) Signal/Power
- B (-) Common
- C Not Used
- D Not Used
Catalog excerpts
LP202-M12 Series Loop Power Sensor, Velocity, 4-20 mA Output, Top Exit M12 Connector Product Features Continuously Monitor & Protect Important Machinery 4-20 mA current proportional to Vibration Transmit Signals Over Long Distances with No Signal Loss Customize Your Settings to Focus on the Most Important Frequencies Actual Product Size Shown Loop Power Acceleration & Velocity Sensors Specifications Output, 4-20 mA Measurement Range Tolerances 4 mA 20 mA Electrical Settling Time (Turn on Time) @ Room Temp (68º F/20º C) Power Requirement (Loop Powered) Voltage Source Electrical Case Isolation Environmental Temperature Range Electromagnetic Sensitivity Sealing Standard Metric See Selection Guide (+) Signal/Power (-) Common Not Used Not Used Specifications Physical Sensing Element Sensing Structure Weight Case Material Mounting Connector (LP202-XXX-M12D) Mechanical Mounting Torque Supplied Accessories Mounting Hardware Standard PZT Ceramic Shear Mode 2.9 oz 82 grams 316L Stainless Steel 1/4-28 4 Pin M12 2 to 5 ft. lbs. Calibration Certificate Ordering Information - Measurement Range Range Type Lifetime Warranty on Materials & Workmanship
Open the catalog to page 1All Connection Technology Center Inc. catalogs and technical brochures
VT104 Series1 Page
FLEXX Box1 Page
SB152/SB2521 Page
CT1011 Page
TA102 Series1 Page
TK124 Series1 Page
TK120 Series1 Page
TC1241 Page
PM110-321 Page
PMX9000 Series1 Page
PMX1000 Series1 Page
TA184 Series1 Page
TA1781 Page
LP9221 Page
LP822-XXX-5XC1 Page
LP4011 Page
LP354-M12D1 Page
LP302-M12D1 Page
LP2581 Page
LP2521 Page
LP204-M12D1 Page
LP2041 Page
LP2021 Page
SC901 Series1 Page
SC200 Series1 Page
LP822 Series1 Page
VP Series1 Page
TC120 Series1 Page
HA602 Series1 Page
CM362 Series1 Page
- Fitting
- Power supply unit
- DC power supply
- Display module
- Electrical cable
- Screw-in fitting
- Data connector
- Temperature probe
- Pneumatic fitting
- Rectangular housing
- Circular connector
- Proximity switch
- Wall-mount box
- Junction block
- Socket electrical connector
- Calibration system
- Acceleration sensor
- Terminal box
- Single-output power supply