High Temperature Connectors

SAL Sensor Actor Line Type HT = High Temperature 125° C Design R = Circular connector Gender K = Female connector Configuration = Axial W = Angled Cable length XX = Length [m] Cable quality S1 = TPE, black

Basic material Contact plating Nickel plated, gold plated Overmould Thermoplastic elastomere Coupling nut/-screw CuZn, nickel plated Technical Data Information on the following pages are basing on below mentioned IEC-standards. Rated voltage Current rating Insulation resistance Mating cycles Technical subject to change without notice.

Gender K = Female connector Assembly = Front panel mounting P = Positioning possible, frontmounting H = Back panel mounting VO = Square flange with O-ring Type of Connection/Installation height XX = Wire lenght [m] L = Solder cup Pxx = Installation height one-piece socket

Basic material Contact plating Nickel plated, gold plated Counter nut CuZn, nickel plated Socket housing CuZn, nickel plated Sealing Compound Polyurethane-resin, UL 94 Technical Data Information on the following pages are basing on below mentioned IEC-standards. Insulation resistance Mating cycles Technical subject to change without notice.

Female connector axial Female connector angled 206 CON5C Technical information starting on page 348

Male connector axial Contact assignment Description Part No. 2 SAL-HT-12-RS4-2 / S1 43-10488 Male connector angled Technical information starting on page 348

Wire cross section [mm²] Contact assignment Female connector axial Male connector axial Connecting cable Female connector angled Male connector axial TPE, black, Li12Y33X

Wire cross section [AWG] Wire material Contact assignment Female connector, M16x1.5 thread Front panel mounting, wire termination Female connector, PG9 thread Female connector, M16x1.5 thread, positioning possible Female connector, PG9 thread, positioning possible Technical information starting on page 348

Wire cross section [AWG] Front panel mounting, wire termination Female connector, Square flange 20x20 Contact assignment Wire material Technical information starting on page 348

Front panel mounting, wire termination Contact assignment Male connector, PG9 thread, positioning possible Technical information starting on page 348 Pin 1 Pin 2 □ Pin 3 Pin 4

Wire cross section [AWG] Front panel mounting, wire termination Male connector, Square flange 20x20 Contact assignment Wire material Front panel mounting, solder termination Male connector, M16x1.5 thread Technical information starting on page 348

Wire cross section [AWG] Wire material Contact assignment Male connector, M16x1.5 thread Back panel mounting, wire termination Female connector, PG9 thread Male connector, M16x1.5 thread Male connector, PG9 thread Technical information starting on page 348

Back panel mounting, dip solder termination Male connector, M16x1,5 thread, installation height 5.5 mm Male connector, M16x1,5 thread, installation height 12 mm Male connector, PG9 thread, installation height 5.5 mm Male connector, PG9 thread, installation height 12 mm 214 CONES' Technical information starting on page 348