CONEC SnapLock Assembly instructions

Product catalog summary

Specifications:
The document outlines the assembly instructions for a hood to hood application, specifically for Part No: 16-002200. It includes the necessary components such as the hood lid, countersunk head screws, connecting pins, and locking plates.

Procedures:

Place the hood lid on the hood assembly and secure it using the supplied countersunk head screws.
For the hood to hood application, insert the connecting pins through the mounting holes of the D-Sub connector into the hood until they lock.
Insert the locking plates into the gaps of SnapLock-clips, ensuring the short sides of the plates face the bottom and top of the gap.

Notes:
The information provided is subject to change without notice.

Catalog excerpts

Place the hood lid on the hood assembly and secure it with the countersunk head screws, supplied. Application hood to hood For Hood to Hood application (Part No: 16-002200) locking plate Insert the connecting pins through the mounting holes of the D-Sub connector into the hood until they lock. Insert the locking plates in the gaps of SnapLock-clips. The orientation of the plates shall be as shown on the picture (the short sides of the plates to be facing the bottom and the top of the gap). Place the hood lid on the hood assembly and secure it with the countersunk head screws, supplied. connection...

Open the catalog to page 2