ACCUDRIVE PRECISION PRODUCTS Now you can get design flexibility and lasting performance from our complete family of AccuDrive Precision Products. Model RG Right Angle Gearhead Output torque capacity up to 8,500 lb.in. Motor sizes (standard), adapters to fit servo motors, NEMA and IEC Center distance 1.5 to 3.5 inches Input power ratings up to 27 H.P, speed range up to 4,000 RPM Sizes available 15, 20, 25, 30 and 35 Universal Mounting with shaft mount and flange mount standard in single reduction type Gear ratios from 5:1 to 60:1 Series S Servo Gearhead Economical Servo Solution Output torque...

Three Levels of Precision • Zero Backlash - absolute zero backlash for life • Low Backlash - as low as 3 arcminutes • Standard Backlash - long lasting ruggedness for less demanding applications Cone Drive Gearing • High torque capacity • High efficiency • Quiet and smooth running • Exact ratios 5:1 and 60:1 in a single stage • High torsional rigidity Anodized Aluminium Universal Housing • Compact cube design saves space • Machined pilots on output shaft caps • Universal housing mounts in any orientation • Lightweight aluminium reduces weight Hollow Shaft Standard • Compact mounting saves space •...

SERVO GEARHEAD SELECTION PROGRAM Our AccuMate® program can help you select the right servo gearhead for your application. Visit http://www.conetools.com/Accudrive to start using Accumate®. Sales: 1-888-994-2663 Sales Fax: 1-888-907-2663 Traverse City, MI. 49685

| S | Standard Backlash | L | Low Backlash | A | Zero Backlash #1 | B | Zero Backlash #2 | C | Zero Backlash #3 | D | Zero Backlash #4 | E | Zero Backlash #5 | F | Zero Backlash #6 | G | Zero Backlash #7 See calculation page 8 for required zero backlash set point #. | S | Unit with motor adaptor & coupling to fit servo motor | A | Unit with motor adaptor & coupling to fit NEMA motor | G | Unit with motor adaptor & coupling to fit IEC motor | L | Unit with motor adaptor to fit servo motor less coupling | K | Unit with motor adaptor to fit servo motor with keyed coupling 0 Unit with input shaft,...

1. Go to the appropriate table for the unit size you have selected. 2. Select the appropriate codes for columns 15 - 19 to match the dimensions on your servo motor flange. 3. Make sure your motor length fits the range accommodated by flange square for the size unit you're specifying. 4. If you can't locate the appropriate code for your motor or need assistance, please contact us. W38 & W51 Motor Flange Square Sales: 1-888-994-2663 Sales Fax: 1-888-907-2663 Traverse City, MI. 49685

Sales: 1-888-994-2663 Sales Fax: 1-888-907-2663 Traverse City, MI. 49685 Key: 1) These values are based on an input speed of 2000 rpm. For all input speeds and continous run output torque rating, see pages 13 - 17 for expanded rating tables. 2) Half way along the output and 100% duty cycle. 3) Ratios 30:1 and above can be self-locking. It is important to review the input torque applied during stopping and reversing. This is of particular importance when unrestrained high inertia loads are involved. Please contact our sales department to _review your application. (C) Cone Drive

(2) Maximum input speed allowed for short acceleration cycles. (3) Maximum input speed allowed for continous or longer duration acceleration cycles. Sales: 1-888-994-2663 Sales Fax: 1-888-907-2663 Traverse City, MI. 49685 Higher input speeds may be acceptable. Please contact our Application Engineers to review your application.

Motor continous Torque Tcont Motor peak Torque Tpeak Motor Rotor Inertia* Jmot Gearhead Inertia* J gear Load Inertia Jload Load Torque _ Toad (non-dynamic Frictional and/or Gravity Load) Reduction Ratio Ratio Cycles per Hour Chr Required Output Torque Treq Maximum Input Speed Speak *Any unit can be used for inertia as long as it is used consistently. If you need assistance please contact our Application Engineers. Sizing and Selection Verification Calculated Data Input torque: TjnpUt = T|oad / (R3tio x eff-) Load inertia referred to input shaft*: Jref = Jload / Ratio2...

The AccuDrive Series W zero backlash units achieve zero backlash by applying a firm, yet moveable clamping force to both sides of the gear teeth. The clamping force is set based on the output torque required for your application. Series W Zero Backlash Design Series W zero backlash units also include a new patented (Pat. 6,386,059) external adjustment feature that allows the clamping force to be easily optimized or adjusted if the requirements of your application change. Zero Backlash Features • Self-compensating design maintains zero backlash for life • Factory set based on output torque required for...

Standard Hollow Shaft units Sales: 1-888-994-2663 Sales Fax: 1-888-907-2663 Traverse City, MI. 49685

Optional Solid Shaft units Sales: 1-888-994-2663 Sales Fax: 1-888-907-2663 Traverse City, MI. 49685

Optional Shrink Disc Hollow Shaft P) DRIVE HOLE M) TAPPED HOLES BORE Optional Shaft End Mount Sales: 1-888-994-2663 Sales Fax: 1-888-907-2663 Traverse City, MI. 49685

Servo Gearhead Expanded Rating Table Size W38 Size W38 Sales: 1-888-994-2663 Sales Fax: 1-888-907-2663 Traverse City, MI. 49685

- 14 - Sales: 1-888-994-2663 Sales Fax: 1-888-907-2663 Traverse City, MI. 49685

Servo Gearhead Expanded Rating Table Size W64 Size W64 Sales: 1-888-994-2663 Sales Fax: 1-888-907-2663 Traverse City, MI. 49685

Sales: 1-888-994-2663 Sales Fax: 1-888-907-2663 Traverse City, MI. 49685

Servo Gearhead Expanded Rating Table Size W89 Size W89 Sales: 1-888-994-2663 Sales Fax: 1-888-907-2663 Traverse City, MI. 49685

Lubrication Series W Servo Gearheads are factory filled with Mobil SHC634 synthetic lubricant. They require no lubrication service throughout the life of the unit. Series W Servo Gearheads are built for universal mounting, ready to mount in any position. Installation Motor on Gearhead: 1. Clean motor shaft and mating surfaces of the motor and gearhead to ensure they are dust free. 2. Slide the motor shaft into the coupling clamp ring until the gearhead and motor flanges are seated together. 3. Tighten the clamp ring screw through the access slot in the gearhead flange to the following torque...