350300 Dynamic Pressure Sensor
8Pages

350300 Dynamic Pressure Sensor Datasheet Bently Nevada Machinery Condition Monitoring Description The Hydro Dynamic Pressure Sensor System consists of the 350300 Hydro Dynamic Pressure Transducer which uses piezoresistive sensing technology and the 146824 interconnect cable. It is intended for measuring both static and dynamic pressure in fluid machines such as hydro turbines or centrifugal pumps. This sensor is an integral part of a Hydro Turbine or Centrifugal Pump Condition Monitoring and Asset Management System. When utilized with our 3500/46M Hydro Monitor and System 1 Plant Asset Management software, it enables trends and specialized dynamic plots for diagnostics. The Dynamic Pressure Transducer has a robust design for high reliability in plant environments and is designed for 50 million cycles. For Hydro Turbine applications this measurement can detect and manage hydraulic phenomena such as Rough Load Zone, vortexing, and cavitation in the draft tube and head cover area, as well as pulsations in the penstock. For centrifugal pump applications, it can help detect and manage cavitation and other flow instabilities that are potentially detrimental to machinery and operations.

350300 Dynamic Pressure Sensor Datasheet Reverse polarity protection Compensated -40°C to 125°C (-40°F to 257°F) Temperature Range 350300 Dynamic Pressure Sensor Operation outside the specified limits will result in false or inaccurate readings. Transducer Characteristics Measurement Range (static) Proof (Over) Pressure Burst Pressure Scale Factor 667 mV/psia (15 psia range) 333 mV/psia (30 psia range) 222 mV/psia (45 psia range) 200 mV/psia (50 psia range) 167 mV/psia (60 psia range 133 mV/psia (75 psia range) 100 mV/psia (100 psia range) 50 mV/psia (200 psia range) 33 mV/psia (300 psia...

350300 Dynamic Pressure Sensor Datasheet Physical & Environmental Weight See Figure 1 in Graphs and Figures section 316L Stainless Steel Body Pressure Connection Electrical Connector Mounting Torque Storage Temperature Check the chemical compatibility of the sensor’s wetted parts (316L stainless steel) with the medium to be measured. Power Supply Power Supply Voltage Supply Voltage Effects

350300 Dynamic Pressure Sensor Datasheet Compliance and Certifications FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: l This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. RoHS RoHS Directive 2011/65/EU

350300 Dynamic Pressure Sensor Datasheet 110M4613 Rev. D AAAA Ordering Option Ordering Information For the detailed listing of country and product specific approvals, refer to the Approvals Quick Reference Guide , Document 108M1756, at Dynamic Pressure Range (3500/46M)1 Dynamic pressure ranges are expressed in peak amplitude units, half of the full peak-to-peak pulsation amplitude. Static pressure ranges are in absolute pressure (Psia, KPaa), so static pressure requirements stated as gauge pressures (Psig, KPag) may necessitate a numerically higher absolute pressure full-scale range. 350300...

350300 Dynamic Pressure Sensor Datasheet Multimode Positive Input I/O Module with External Terminations

350300 Dynamic Pressure Sensor Datasheet Figure 1: 350300 Dynamic Pressure Sensor Dimensions and Pinout Figure 2: 146824-AAAA Cylinder Pressure Cable

350300 Dynamic Pressure Sensor Datasheet Copyright 2020 Baker Hughes Company. All rights reserved. Bently Nevada, Orbit Logo and System 1 are registered trademarks of Bently Nevada, a Baker Hughes Business, in the United States and other countries. The Baker Hughes logo is a trademark of Baker Hughes Company. All other product and company names are trademarks of their respective holders. Use of the trademarks does not imply any affiliation with or endorsement by the respective holders. Baker Hughes provides this information on an “as is” basis for general information purposes. Baker Hughes...