Condair JetSpray
8Pages

JETSPRAY Compressed air and water spray humidifier Guaranteed drip free Humidification and Evaporative Cooling

JetSpray panel An IP54 rated cabinet with easily accessible internal components to control the operation of the nozzles. All electronic elements are housed in a separate compartment above the water and air pipes. Power supply Single phase power, 230V/50Hz or 110V/60Hz, max 210W power consumption (excluding air compressor). Remote user interface Backlit digital multilingual display with keypad giving control and information on operation, commissioning, service requirements and fault diagnostics. Can be located up to 100m from the JetSpray panel. The system can also be controlled via BMS....

Self-cleaning nozzles Precision engineered nozzles with a 10year warranty oer long life, minimal maintenance and are intrinsically safe with no local electrical supply required. Humidity sensor A single in-room humidistat or up to three averaging sensors can be used to monitor room conditions and provide accurate humidity control. Drain Automated drain and purge cycles ensures water cannot stagnate in the system. Air run-on leaves water pipework dry when no humidity is required. PureFlo Ag+ silver ion water treatment Silver is a powerful bacteriostatic agent with residual eects throughout...

Innovative design and quality construction allow JetSpray nozzles to carry a 10-year warranty High performance & robust operation Why use compressed air? A compressed air and water humidifier oers guaranteed evaporation of the moisture into the atmosphere without any potential risk of drips. By forcing the water to mix with the air under pressure, the sprays produced are rapidly absorbed and highly directional. This makes the JetSpray ideal for cold temperature applications, such as cold stores, where the ambient humidity is often high and moisture less readily absorbed by the air. As no...

Easy to install and service for any competent HVAC installer Maintenance-free diaphragm Security backscrew Adjustable balance system Non-drip stop valve Maintenance-free no-block water jet

Proven technology across many industries for over 30 years Trusted Proven technology JetSpray has been humidifying factories and processing plants throughout the world for over 30 years and is trusted by leading companies in many dierent industries including: Textile Printing Tobacco Cold storage Automotive Tea Crop storage Abattoirs Electronics Botanical gardens Pulp and paper Hygienic operation The JetSpray is a sealed system with no open water tanks, minimising the risk of water contamination. Automatic purge and flush cycles ensure water cannot remain in the pipelines to stagnate. An...

Energy ecient humidification with low operating costs Ecient 50% less water consumption The JetSpray can be operated on any type of potable water supply. This reduces water consumption by up to 50% compared to other spray humidifiers that need demineralised or softened water to prevent blockages at the nozzle. 30% less air consumption Unlike other air and water spray humidifiers, which use the air pressure to push back the self-cleaning pin mechanism, the JetSpray nozzle uses the water pressure. This results in a lower required air pressure and a 30% reduction in compressed air consumption...

Typical system overview (600L/h) Options Ultra-violet water steriliser Averaging in-room humidity sensor (up to 3 on 600L/h only) Water temperature alarm Air filter Air compressor RO water treatment 1 JetSpray panel 2 Remote user interface 3 PureFlo Ag+ silver ion cartridge and particle filter (5 micron) 4 Air in 5 Water in 6 Air out 7 Water out 8 Drain 9 Nozzles 10 End of line 11 In-room humidity sensor Technical data Model Output kg/h Modulating or on/o Humidity control Power consumption (ex. air compressor) W Power supply Nozzle output (Litres/hr) scfm air consumption per nozzle @ 2.2bar...