Condair GS
8Pages

Using waste heat with gas-fired steam humidifiers Condair GS Humidification and evaporative cooling

Economical and ecological steam production with gas as primary energy. Gas-operated steam humidification For efficient operation, the primary energy source gas can be used as a costefficient alternative to conventional steam humidification with electricity. 360° Full-Circle technology The combustion system’s newly developed 360° Full-Circle technology guarantees optimum surface use, low emissions, and enables continuously adjustable output regulation. Heat exchange chamber The innovative heat exchange chamber is protected from heat loss with a patented insulation system and achieves a...

DVGW-certified heat recovery via the air conditioning system Condair GS enables the exhaust gas to be used for heat recovery. This unique and DVGW-certified technology removes the need for a chimney and enables the system’s heating/operating costs to be significantly reduced. Precise control The Condair GS is available in six different output variants allowing continuous adjustment from 10 kg/h to a maximum of 240 kg/h. The microprocessor-controlled device interface can be regulated with all currently used control signals. Robust construction in rust-free stainless steel Condair GS units...

Exhaust gas heat recovery via the HVAC unit Using HVAC exhaust air to discharge exhaust gas provides some significant advantages. Firstly, installation is significantly easier, as a chimney is no longer required. Exhaust gas heat is used and regenerated through heat recovery in the HVAC unit, and the quality of exhaust air does not decrease in the process. A range of power levels let you select the right unit for your needs, for use in a wide area of applications. In addition, the heat output achieved in the HVAC unit increases along with the volume of steam. The energy in the exhaust gas...

Gas-fired steam humidifier with conventional exhaust routing Gas-fired steam humidifier with DVGW-certified exhaust gas heat recovery via your HVAC unit

Efficient technology pays off! Steam output Total usable exhaust gas heat output is the result of sensible heat, achieved through the high exhaust gas temperature, and latent heat, in the form of steam. The values in parentheses represent sensible heat gain without condensation heat. The perfect match! Variable plant situations require custom solutions. The range of Condair GS variants makes it possible for you to select a unit that precisely matches your planning requirements and the design of your HVAC system. Existing limitations are overcome through the exhaust gas discharge system and...

Existing savings potential through ventilation heat consumption, including condensation heat recovery [kW] 25 kW HR 75% Condair GS Indoor installation (room air-dependent) Combustion air is sucked away from the installation room Condair GS RS Indoor installation (room air-independent) Combustion air is fed in separately Condair GS OC External installation with robust all-weather protection cover

© 03/2015 Technical modifications and errors excepted Standard model Stainless steel steam cylinder 360° full-circle burner technology Internal PI humidity controller Remote signaling of operational readiness / operating mode / maintenance / faults Analog signal for current steam production Control panel with LCD display Self-diagnostic system Steam distributor for duct [1] Steam distribution hose [2] Condensate hose [3] DVGW-certified exhaust installation [4] Exhaust gas distributor [5] Condensate trap [6] Base frame [7] OptiSorp multiple steam distribution system Humidity sensor for...