SWIMMING POOL Dehumidification systems for private indoor swimming pools, Dehumidification systems for indoor for hotels, spas or therapeutic clinics swimming pools and spas Humidification, dehumidification and evaporative cooling

Why install a dehumidification system in an indoor pool? A high degree of water evaporation is common with indoor pools, especially in combination with elevated air temperatures, leading to high indoor humidities and an oppressive atmosphere. Without controlling the humidity, the stay in an indoor swimming pool can feel uncomfortable and the subtropical climate might lead to cardio-vascular problems. Furthermore, there is a risk that the condensation on metal fixtures, exterior walls or glass surfaces may lead to the formation of mold, corrosion and cause mustiness. When this occurs, it could eventually...

CONDAIR DP-WWall-mounted dehumidifier The Condair DP-W swimming pool dehumidifier is a chest-type unit mounted directly onto a wall in the pool area. Five models are available with a maximum dehumidifying capacity of 49 to 190 l/day. Installation is very simple with low assembly costs and required connections for just the electrical power and condensation drain. The unit has a slim depth of 260mm or 310mm, with smart and durable housing, in pure white RAL 9010, to blend perfectly with the architecture of the swimming pool area. The units are particularly recommended for retrofitting. The efficient...

The Condair DP-R is recommended for installations when the dehumidifier needs to be housed away from the swimming pool area, either due to space or aesthetic reasons. With the compressor and fans housed away from the pool, any machine noise is reduced to a minimum. The Condair DP-R pool dehumidifier is available in five different sizes with a maximum dehumidifying capacity ranging from 49 to 190 l/day. This model is wall-mounted in a room adjacent to the swimming pool. The connection to the pool area is made by using an optional 90° ducting kit through the wall, leaving only the supply and return...

CONDAIR DP-CCeiling-mounted dehumidifiers The Condair DP-C is a compact solution for air dehumidification. The flat design of this model makes it ideal for mounting under the ceiling or in a suspended ceiling. This type of installation is particularly suitable where there is no plant room or the existing plant room is too small to install a floor-mounted unit. All emitting components, such as compressors and fans, are located outside the swimming pool area. The Condair DP-C pool dehumidifiers are available in five different sizes, with a maximum dehumidifying capacity of 49 to 190 l/day. As an alternative...

CONDAIR DPDehumidifier for the installation in the mechanical room The Condair DP dehumidifiers can be used in hotel indoor swimming pools, wellness centres and therapeutic areas. These units are installed in a central utility room with ventilation ducts channeling the air to the pool area. This process of recirculating air ensures a safe and energy-efficient dehumidification system. Ten different capacities are available with dehumidification from 73 to 940 l/day, covering a wide range of applications. The recuperated thermal energy from the high-performance heat pump circuit is completely returned...

CONDAIR DP HEHigh-efficiency dehumidifier The highly efficient Condair DP-HE swimming pool dehumidifier is used for humidity and temperature control with simultaneous heat recovery and external air supply, which can be controlled automatically to offer maximum comfort in the swimming pool area. Seven models are available with a maximum dehumidifying capacity range from 133 l/day to 565 l/day while operating at recirculation mode. When run at outdoor air operation mode, the dehumidification capacities can reach a maximum 1054 l/day. Functional principle A fan (G) draws in the very warm and humid...

If the supply air does not reach the required temperature by passing though the condenser (e.g., with very low outside air temperatures), a downstream hot water heating coil (H) is used to heat the air. The proportion of the mixed outside air is up to 30% of the total nominal airflow. Adding outside air improves the quality of the air inside the pool area considerably. Furthermore, depending on the outside air conditions, the cross-flow heat exchanger is used beneficial as a pre-dehumidifier of the humid return air. This requires less energy for the actual dehumidification process via the refrigeration...

(1) at tR = 30°C; relative humidity = 80% (2) at tR = 35°C; relative humidity = 75% (3) Laboratory values at 1 m in open air compliant with ISO 9614, actual values may vary 10 (4) at tR = 30°C; water temperature 80/70°C, compressor at standby (5) at tR = 30°C; relative humidity = 80%; water temperature 27/32°C (6) without electrical heater (7) Sound power level compliant with ISO 9614 (8) without outside air mix (9) incl. 30% outside air mix (-5°C, 80% r.H.) (10) R410A global warming potential (GWP) = 2088 CO2e

CEILING-MOUNTED Condair DP-C Technical Data (1) at tR = 30°C; relative humidity = 80% (2) at tR = 35°C; relative humidity = 75% (3) Laboratory values at 1 m in open air compliant with ISO 9614, actual values may vary (4) at tR = 30°C; water temperature 80/70°C, compressor at standby (5) at tR = 30°C; relative humidity = 80%; water temperature 27/32°C (6) without electrical heater (7) Sound power level compliant with ISO 9614 (8) without outside air mix (9) incl. 30% outside air mix (-5°C, 80% r.H.) (10) R410A global warming potential (GWP) = 2088 CO2e

MAIN UNIT Condair DP Technical Data (1) at tR = 30°C; relative humidity = 80% (4) at tR = 30°C; water temperature 80/70°C, compressor at (8) without outside air mix (2) at tR = 35°C; relative humidity = 75% standby (9) incl. 30% outside air mix (-5°C, 80% r.H.) (3) Laboratory values at 1 m in open air compliant with ISO (5) at tR = 30°C; relative humidity = 80%; water temperature (10) R410A global warming potential (GWP) = 2088 CO2e 9614, actual values may vary 27/32°C without electrical heater Sound power level compliant with ISO 9614