INDUSTRIAL DEHUMIDIFIERS Advanced range of compressor and desiccant dehumidifiers

Adsorption range of the rotor Regeneration area of the rotor Regeneration heater Desiccant drying - typical principle of operation Condair DA desiccant dehumidifiers Condair DA desiccant dehumidifiers are designed to operate in very cold conditions or wherever extremely low humidity is required. Condensation modules remove moisture from the regeneration air for applications where outside venting of regeneration air is not possible. The Condair DA’s powerful sorption rotor allows it to bring humidity levels down to a minimum at temperatures as low as -30°C. In addition to the standard electrically...

Double-wall housing As of size DA 500, all units have a fully insulated double-wall housing made of corrosion-resistant Aluzinc® with powder coating as standard. The spaces between the housings are filled with at least 30 mm of mineral wool as an insulation material. This ensures safe and efficient operation even at very low temperatures as well as maximum hygiene. Optionally, the housing can also be manufactured in AISI 304 stainless steel. Comprehensive control options The Condair adsorption dryers can be equipped with different control variants depending on customer requirements. Depending...

Technical data Technical data Laboratory values measured with connected ventilation ducts at a distance of 1 m from the instrument surface. Actual values may vary.

1) All data refers to a standard unit with electrical regeneration.

Expansion valve Condensation Tray Compressor Condensing dehumidification — typical principle of operation Condair condensing dehumidifiers have many different applications across the industrial, commercial and warehousing sectors. They incorporate a refrigerant circuit system to remove moisture from the atmosphere and are typically used in areas that require a relative humidity of >50%. The DC system can be configured in a variety of ways to meet individual project requirements. The dehumidification capacity of the standard models in the Condair DC series range from 75 to 930 litres per day....

Durable housing The standard galvanized metal casing has a powder-coated enamel surface and provides robust performance in tough industrial applications. Optional stainless steel housing is also available. The external casing is easy to disassemble and provides fast access to all internal components for servicing. Flexible connection options Condair DC dehumidifiers can deliver dry air directly to a room's atmosphere or can be connected to a building's ducted ventilation system with additional connection frames. For longer duct networks and specialist applications, more powerful fans are available....

DC condensing dehumidifiers Technical data full load current; FLA = full load amperage laboratory values in 1 m free field according to ISO 9614, actual values may differ R410A global warming potential (GWP) = 2,088 CO2e

Condair DC-R rear wall-mounted condensing dehumidifiers Technical data

Condair DC-C ceiling-mounted condensing dehumidifiers Technical data 2) full load current; FLA = full load amperage 3) laboratory values in 1 m free field according to ISO 9614, actual values may differ 4) R410A global warming potential (GWP) = 2,088 CO2e

Condair DC-N condensing dehumidifiers with remote heat dissipation Technical data / Dehumidifier 2) full load current; FLA = full load amperage 3) laboratory values in 1 m free field according to ISO 9614, actual values may differ 4) R410A global warming potential (GWP) = 2,088 CO2e 5) incl. outdoor condenser

Condair DC-LT condensing dehumidifiers for low temperatures Technical data

Technical details correct at time of publishing. Specification may vary from those shown. Condair plc Artex Avenue, Rustington, Littlehampton, West Sussex, BN16 3LN, UK Tel: +44 (0)1903 850200 - [email protected] - www.condair.co.uk 07/2019