icon Linear In-line Actuator Intelligent actuators with integrated controller (icon) enable the use of MODBUS RTU on an RS485 serial communication. One of the industry’s most powerful standards. The icon options provide everything from easy maintenance, control and installation, to a wide range of customizable settings and feedback that will help tailor the movement solution to your specific needs and application. Standard Specifications Temperature Cable specification Cores: 2 x AWG16 + 6 x AWG 28, Ø = 6,4 mm, black jacket, Molex Mini-Fit Jr. 8 pin or similar. Bending Radius Actual weight may vary depending on model and options selected For other mechanical data please refer to Concens standard con35/50/60 datasheet. Configurations Configuration Single/Direction/ Basic Single/Direction/ Hall Single/Direction/ Position Single/Position/ Position Single/Bus/ Status Multiple/Direction/ Override Input: STOP Input: Position (analog) Output: Error Output: HallA Output: Position (analog) Output: HallB Single actuator setup Input: Override Signal-GND Signal-GND Multi actuator setup Contact Concens for availability at this time Features Adjustable start ramp Adjustable stop ramp Adjustable current limit Industrial interface MODBUS RTU on RS485 Internal stroke limitation Internal heat protection Plug & Play solution with conXion box Check for updates at www.concens.com Same BID (Build in Dimension) as con35/50/60 with Hall. Please see original datasheet for con35/50/60 Use of ”safe zone” will inevitably decrease the usable part of the stroke length of the actuator. Contact Concens for any special requirements

Stainless steel Max. static load 5400 N Standard brackets for icon50 and icon60, please see original datasheet for con50 and con60 Alu Alu Stainless steel Stainless steel Max. Static load 5400 N Max. Static Max. Static load 5400 N load 5400 N Electrical Wiring DIMENSIONS ARE IN mm DIMENSIONS WITHOUT 21-12-2020 Phone: +4570111131 TOLERANCES IN Fax: +4576105010 ACCORDANCE WITH Mail: [email protected] ISO 2768-mK Web: www.concens.com DO NOT SCALE DRAWING Properietary and confidential Material: The information contained in this drawing is the sole property of Finish: Concens A/S. Any reproduction...