*mydirectindustry

con60

Product catalog summary

Specifications:
The Con60 linear in-line actuator is designed with a maximum static load capacity of 18,100 N for aluminum and stainless steel components. For stroke lengths greater than 400 mm, the maximum load is limited to 5,000 N. The actuator operates within a temperature range of -20°C to +50°C and can be stored between -40°C to +70°C. It has an IP66 protection class, ensuring resistance to dust and water.

Materials and Construction:
The motor and actuator tube are made of powder-coated steel, the piston rod is stainless steel, and the front and rear brackets are aluminum. The actuator is available in black (RAL 9005).

Electrical and Mechanical Features:
The actuator uses a 24 VDC power supply with a permanent magnet motor, drawing a maximum current of 11.5 A. It offers various gear ratios (19, 43, 66, 81, 100) with corresponding maximum loads and speeds. The duty cycle is limited to 10%, or 2 minutes of use followed by 18 minutes of rest.

Options and Customizations:
The actuator can be customized with stainless steel versions, different bracket types, hall sensors for positioning, and harsh environment (HE) versions tested to IP68 and IP69 standards. Other options include low noise versions, emergency lowering, and various cable lengths.

Mounting and Usage Recommendations:
Proper mounting methods are crucial, with both brackets needing to be mounted in the same orientation and able to rotate on axles. Radial forces should be avoided, and actuators should not be clamped on tubing. For medical applications, specific environmental conditions and power supply guidelines must be followed.

Warnings and Limitations:
The actuator should not be exposed to hammer strikes, and power supplies must include over-current protection to prevent damage. Performance may be affected by temperature, load, and cable length. The actuator is not suitable for safety-critical applications.

Disclaimer:
While Concens strives to provide accurate information, it is the customer's responsibility to validate the suitability of the product for their specific application. Specifications are subject to change without notice.

Catalog excerpts

con60 Linear In-line Actuator Standard Specifications (Specifications for non-standard actuators eg. HE-version, may vary) Motor/Gear 24 VDC power supply, permanent magnet motor (max. current is 11,5 A, absolute max. voltage is 28 VDC) Gear ratio Maximum load Speed at maximum load Max. static load/ Self locking force Alu/Stainless steel: 18100 N Depending on stroke length for push-applications Max. load limited to 5000 N for stroke length > 400 mm Protection class IP66 Cable specification 1 m, 2 x 1.3 mm² (AWG16), Ø = 6.4 mm, black, Molex Mini-Fit Jr. 6 pin Bending Radius Motor and actuator tube are powder coated steel Piston rod is stainless steel Front and rear brackets are aluminium Duty cycle Max. 10 % or 2 minutes in use followed by 18 minutes rest Stroke length/weight Stroke Actual weight may vary depending on model and specifications Stainless steel versions (AISI 316) Brackets in stainless steel Brackets with clevis Brackets with spherical bearings Hall sensors for positioning and/or synchronization HE (Harsh Environment) version Tested according to IP68 and IP69 and passed the criteria for a depth of one meter for one hour. Test reports are available on request. Low noise version Spline and emergency lowering Other cable lengths (1 - 9 m) Check for updates at www.concens.com Version certified according to IEC60601-1, ANSI/ AAMI/ES60601-1, CAN/CSA-22.2 No60601-1 available On Request Available in all RAL colors Other stroke lengths available Customised front and rear brackets Customised build-in-dimensions Contact Concens for any special requirements

Open the catalog to page 1

Graphs are indicative only Dimensions Axial backlash: +/- 0.5 mm Recommended max. current: 24 VDC = 11,5 A. Graphs are indicative only Build-in Dimension BID AllDenmark ratios Gear Ratio Øresundsvej 7 General dimensional variation: +/- 1 mm Concens GENERAL TOLERANCES IN Drawn Harsh Emergency sel 04-10-2019 Hall ACCORDANCEEnviroment WITH lowering/spline Checked Productname: ISO 2768-mK Eng Appr. + 31 Mfg Appr. Q. Appr. 25 mm not HE-version Comments: Productgroup: Mail: 358 Web: + stroke mm [email protected] 15 mm + ww.concens.com DO NOT SCALE DRAWING Material: Properietary and confidential Stroke...

Open the catalog to page 2

Standard Brackets Alu/Stainless steel Alu/Stainless steel with clevis Alu with spherical bearings Alu./steel Stainlessload 18100 clevis steel with clevis static with 11000 N Alu./ Stainless Stainless clevis AluMax. Alu load steel with N with Alu with with Alu./ steel Alu./ StainlessN Alu./ steel Max. static load Alu./ Stainless StainlessMax. static 18100 steel spherical bearings spherical spherical bearings bearings Max. static load 11000N static load 11000N Max. staticMax. 11000N load Max.static load Max.static Max.static load load Max. static load Max. static load Max. static load 18100N 18100N...

Open the catalog to page 3

Con60 con60Item number combination Item Number Combination 6 0 0 0 Type ID Piston ring color Tube color Brackets Steel & IP Class Hall sensors (- without hall /+ with hall) Cable & Connector Cable Length Pitch (- without low noise /+ with low noise) Stroke length Product series Recommendations and warnings Never expose the actuator to hammer strike during installation or in other situations. Retrofitted bushings should be pressed into the bracket-borings. No hammering. Power supply without over-current protection can cause serious damage to the actuator at mechanical end-stop or when actuator...

Open the catalog to page 4

con60

con60

Catalog excerpts

All Concens A/S catalogs and technical brochures