BALL VALVE America r. Made Quality since 1928

Quality, Service and Innovation Now in its ninth decade, Conbraco Industries, Inc. is a leading manufacturer of flow control products for U.S. and international markets. The company’s headquarters is based in Matthews, North Carolina with manufacturing plants and foundries located in Pageland and Conway, South Carolina. Conbraco has a history of new product development and innovation that dates back to the company’s inception in 1928. Today, the Conbraco line of products is marketed under the “Apollo Valves” brand and includes: ball valves, butterfly valves, backflow prevention devices, water...

TOP ENTRY BALL VALVES Apollo® Top Entry Ball Valve Features: TOP ENTRY ADVANTAGES: £ Self-Adjusting Seats: Compensate for Wear & Temperature Fluctuations £ Spring Loaded Low Pressure Seals £ Pressure Activated Seating £ Built-In Antistatic Feature £ Simplified In-line Service £ Minimal Potential Leak Paths £ ISO 5211 Mounting Pad STANDARDS COMPLIANCE (Most valves within this family of products comply with the requirements of these listed standards.) ASME B16.5 ASME B16.10 ASME B16.34 ASME B31.1 ASME B31.3 ASME B31.8 API 598 API 607 MSS SP-25 MSS SP-61 MSS SP-72 “Pipe Flanges and Flanged Fittings”...

TOP ENTRY BALL VALVES Materials BODY MATERIAL: Body Material Code: Description Body (all types) Bonnet Packing Gland Gland Plate Gland Plate Bolts Stop Stop Bolts Lockplate Lever Assembly (1/2 - 2”) Lever Stem Nut (1/2" - 2") Lever Assembly (3” - 8”) Adapter Screw (3" - 8") Stem Screw (3" - 8") External Grounding Spring Body Joint Studs Body Joint Nuts Carbon Steel ASTM A276 Type 316 Stainless Steel 316 Stainless Steel ASTM A193 Grade B8 ASTM A276 Type 304 300 Stainless Steel 302 or 304 Stainless Steel 304 SS w/Vinyl Grip 300 Series Stainless Steel 316 SS Adapter with Stainless Pipe 1 300 Series...

TOP ENTRY BALL VALVES Materials TRIM (INTERNAL) MATERIAL (CONT’D): Trim Material Code: Description M N M35-1 Nickel (200) ASTM A494-M35-1 ASTM A494-CZ100 or Ball ASTM B164-K400 or ASTM B160-200 N04400 Stem ASTM B164-K400 ASTM B160-200 N04400 Seat Ring(s) (from bar, tube or pipe depending on availability) Internal Spring (M seat) Internal Spring (4, 5, 6, 8, 9, B, C, D, G, H, L, N, or U seats) Y Hastelloy B ASTM B335 N10665 or ASTM A494-N-12MV ASTM B335 N10665 ASTM B335 N10665 SEAT & SEALS MATERIAL: Seat Code: Seat Seat O-ring Stem Packing Bonnet Gasket Stem Bearing Default Suffix 5 55% Bronze,...

TOP ENTRY BALL VALVES Seat Materials and Seat Designs SEAT CODE “G” (PCTFE) Polychlorotrifluoroethylene is typically used in cryogenic applications. High resistance to inorganic corrosive liquids, including oxidizing acids. Resistant to most organic solvents except some highly halogenated and aromatic materials. (Figure 1) See Pressure-Temperature Chart 2, page 10. SEAT CODE “L” (TFM MULTISEAL) API-607 fire-safe design. This seat design has been successfully tested to the requirements of API 607. The Multiseal seat is fully confined by a metallic seat holder which provides a secondary seal in...

TOP ENTRY BALL VALVES Seat Materials and Seat Designs SEAT CODE “U” (UHMWPE) Exhibits the same characteristics as the #6 seat with the exception that it utilizes the inner seat ring to enhance performance in abrasive services. UHMWPE should be used with caution in the presence of solvents, and the operating torque can be expected to be 30% higher than that of the PTFE based seat materials. (Figure 1) See Pressure-Temperature Chart 4, page 11. SEAT CODE “8” (PEEK) PEEK (PolyEtherEtherKetone) offers a high strength alternative to RPTFE, resistant to creep and cold flow. This seat offers good abrasion...

ASTM A216 Grade WCB Carbon Steel Class 150 Class 300 Class 600 2 ASTM A351 Grade CF3M (close wrought equivalent is 316L SS) Class 150 Class 300 Class 600 -29 to 38 C 19.6 bar 51.1 bar 102.1 bar 19.0 bar 49.6 bar 99.3 bar 15.9 bar 41.4 bar 82.7 bar 50 C 19.2 bar 50.1 bar 100.2 bar 18.4 bar 48.1 bar 96.2 bar 15.3 bar 40.0 bar 80.0 bar 100 C 17.7 bar 46.6 bar 93.2 bar 16.2 bar 42.2 bar 84.4 bar 13.3 bar 34.8 bar 69.6 bar 150 C 15.8 bar 45.1 bar 90.2 bar 14.8 bar 38.5 bar 77.0 bar 12.0 bar 31.4 bar 62.8 bar 200 C 13.8 bar 43.8 bar 87.6 bar 13.7 bar 35.7 bar 71.3 bar 11.2 bar 29.2 bar 58.3 bar 250...

TOP ENTRY BALL VALVES Pressure-Temperature Ratings ASTM A351 Grade CN7M (close wrought equivalent is Alloy 20) Class 150 Class 300 Class 600 Valve Body Rating1 – psi ASTM A494 Grade CW-12MW (close wrought equivalent is Hastelloy® C) Class 150 Class 300 Class 600 ASTM A494 Grade M-35-1 (close wrought equivalent is Monel®) Class 150 Class 300 Class 600 ASTM A351 Grade CN7M (close wrought equivalent is Alloy 20) Class 150 Class 300 Class 600 Valve Body Rating1 – bar ASTM A494 Grade CW-12MW (close wrought equivalent is Hastelloy® C) Class 150 Class 300 Class 600 ASTM A494 Grade M-35-1 (close wrought...

TFM, SEAT CODE"L" AND"M" SRTFE, SEAT CODE "D" NYLON, PCTFE - PRESSURE-TEMPERATURE RATINGS NYLON 6/6, SEAT CODE"N" PCTFE, SEAT CODE "G"

UHMWPE, SEAT CODES"6" AND"U" For additional information, submittal sheets and manuals, visit www.apollovalves.com

PEEK, SEAT CODE "8" C-PEEK, SEAT CODE "B" CARBON-GRAPHITE SEATS - PRESSURE-TEMPERATURE RATINGS - CARBON GRAPHITE, SEAT CODE "4" - HIGH TEMP GRAPHITE, SEAT CODE"H"

CERAMIC, SEAT CODE "9" STEAM RATED SEATS - PRESSURE-TEMPERATURE RATINGS CARBON GRAPHITE, SEAT CODE "4" 55% BRONZE, 5% MOLY, SEAT CODE "5" HIGH TEMP GRAPHITE, SEAT CODE "H" For additional information, submittal sheets and manuals, visit www.apollovalves.com

TOP ENTRY BALL VALVES ASME Class, Standard Port, Flanged DIMENSIONS E

TOP ENTRY BALL VALVES ASME Class, Standard Port, Flanged DIMENSIONS ASME CLASS 150, STANDARD PORT, FLANGED Size ASME CLASS 300, STANDARD PORT, FLANGED Size ASME CLASS 600, STANDARD PORT, FLANGED For additional information, submittal sheets and manuals, visit www.apollovalves.com