jflace lemf

TECHNICAL SHEETS CONTENTS INTRODUCTION TABLE OF CONTENTS BY SERIES No. APOLLO® NUMBERING SYSTEM WARRANTY & TERMS OF SALE BALL VALVES SECTION A - 2-PIECE SECTION B - 3-PIECE SECTION C - UNIBODY SECTION D - ASME FLANGED SECTION E - 3-WAY SECTION F - UNION END SECTION G - STEAM PREP SECTION H - SPECIALTY SECTION J - OPTIONAL CONFIGURATIONS SECTION M - ENGINEERING DATA SECTION N - TOP ENTRY NEEDLE VALVES SECTION P - METAL SEATED, GLOBE PATTERN, VEE-TIP ACTUATION SECTION R - ACTUATORS BUTTERFLY VALVES SECTION S - HIGH PERFORMANCE BUTTERFLY VALVES LEADFREE CERTIFIED OPTIONS THROUGHOUT THIS CATALOG,...

“Apollo” Flow Controls

APOLLO® NUMBERING SYSTEM PLEASE USE ALL DIGITS WHEN ORDERING. A MATERIAL OR STYLE 00-000-00 TYPE VARIATIONS 2-PIECE & UNIBODY VALVES FLANGED VALVES * Bronze valves only Almm Flow Controls Customer Service (704) 841-6000 www.apolloflowcontrols.com

NOTE: NOT ALL OPTIONS AND COMBINATIONS AVAILABLE ON ALL SIZES AND SERIES. REVIEW THE SPECIFIC TECHNICAL SHEET TO DETERMINE AVAILABILITY. Modifying Suffixes • The “01" suffix represents the standard configuration detailed in the Technical Literature. • If an option is desired, replace the “01" suffix with the suffix of the option. • If multiple options are desired, replace the “01" suffix with the desired suffixes in the order shown below. Example: 87A-10A-1424MG

MADE IN USA Conbraco Industries, Inc. warrants, to its initial purchaser only, that its products which are delivered to this initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material for a period of FIVE years from the date of delivery to you, our initial purchaser. This warranty applies to Apollo brand product with “Made in the USA” markings only. Should any failure to conform to this warranty appear within FIVE years after the date of the initial delivery to our initial purchaser, Conbraco will, upon written notification...

BALL VALVES LEADFREE OPTIONS PRODUCTS THAT ARE CERTIFIED LEAD FREE* OR HAVE A LEAD FREE* OPTION WILL BE IDENTIFIED WITH THESE LOGOS. *LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with Federal Public La w 111-380. ANSI 3rd party approved and listed. **Any imported products will be clearly identified as “Apollo International™" or “Conbraco™ International".

Female NPT Thread, 600 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. (See referenced P/T charts) Vacuum Service to 29 inches Hg. MSS SP-110 compliant. FEATURES • Two-piece body • Reinforced seats • Blowout-proof stem design • Adjustable packing gland VARIATIONS AVAILABLE • 70-140 Series (316 SS Ball & Stem) • 70-190 Series (Locked Retainer) STANDARD MATERIAL LIST DIMENSIONS PRODUCT NUMBER OPTIONS AVAILABLE (MORE INFORMATION IN SECTION J) • Minimum quantities apply • To specify an option, replace the “01" standard suffix with the suffix of the option. • To specify multiple options, replace...

Female NPT Thread, 600 CWP (psig). 150 psig SWP. (See referenced P/T charts) Vacuum Service to 29 inches Hg. MSS SP-110 compliant. CRN: OC10908.5C FEATURES VARIATIONS AVAILABLE: • Lead-Free1 brass and bronze materials • 70LF-140 Series (316 SS Ball & Stem) • NSF/ANSI 61 Section 8, Annex G • 70LF-HC Hose Cap & Chain • Easily identifiable blue hang tag & white lever grip • RPTFE seats and stuffing box ring • Designed, manufactured, and 100% factory tested in the USA • NSF-372, Drinking Water System Components - Lead Content OPTIONS AVAILABLE (MORE INFORMATION IN SECTION J) • Minimum...

Female NPT Thread, 600 CWP (psig), Cold Non-Shock. 250 psig Saturated Steam. (See referenced P/T charts) Vacuum Service to 29 inches Hg. MSS SP-110 compliant. FEATURES • Two-piece body • MPTFE seats & packing • 85-5-5-5 Body & retainer Slot vented ball Stainless steel ball & stem Blowout-proof stem design Adjustable packing gland STANDARD MATERIAL LIST OPTIONS AVAILABLE (MORE INFORMATION IN SECTION J) • Minimum quantities apply • To specify an option, replace the “64" standard suffix with the suffix of the option. • To specify multiple options, replace the “64" suffix with the desired suffixes...

Solder End, 600 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. (See referenced P/T charts) Vacuum Service to 29 inches Hg. MSS SP-110 compliant. FEATURES • Two-piece body • Blowout-proof stem design • Reinforced seats • Adjustable packing gland VARIATIONS AVAILABLE • 70-240 Series (316 SS Ball & Stem) • 70LF-HC Hose Cap & Chain STANDARD MATERIAL LIST The 70-200 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperature not to exceed500°F. OPTIONS AVAILABLE (MORE INFORMATION...

Solder End, 600 CWP (psig). 150 psig SWP. (See referenced P/T charts) Vacuum Service to 29 inches Hg. MSS SP-110 compliant. CRN: OC10908.5C FEATURES • Lead-Free* brass and bronze materials • RPTFE seats and stuffing box ring • NSF/ANSI 61 Section 8, Annex G • Designed, manufactured, and 100% factory tested in the USA • Easily identifiable blue hang tag & white lever grip • NSF-372, Drinking Water System Components - Lead Content OPTIONS AVAILABLE (MORE INFORMATION IN SECTION J) • Minimum quantities apply • To specify an option, replace the “01" standard suffix with the suffix of the option. •...

Male x Female NPT Thread, 600 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. (See referenced P/T chart) Vacuum Service to 29 inches Hg. MSS SP-110 compliant. FEATURES VARIATIONS AVAILABLE • Two-piece body • 70-840 Series (316 SS Ball & Stem) • Reinforced seats • Male x female threaded end connections • Blowout-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST DIMENSIONS PRODUCT NUMBER OPTIONS AVAILABLE (MORE INFORMATION IN SECTION J) • Minimum quantities apply • To specify an option, replace the “01" standard suffix with the suffix of the option. • To specify multiple...