• NAMUR The shaft driven accessory interface conforms to the NAMUR standard and is identical on all G-Series actuators, allowing for standardization of accessory mounting hardware and installation practices • Pneumatic and hydraulic scotch-yoke actuators • Automates ball, butterfly, plug valves and any other 90° rotating mechanisms • Standard operating pressures: Pneumatic — to 200 psig (14 BAR) • Standard operating temperature is -20°F to +200°F (-29°C to +93°C) Optional trims available: 0°F to +350°F (-18°C to +177°C) -50°F to +180°F (-46°C to +82°C) • Mechanical and hydraulic manual overrides are available • Salt Spray Testing per ASTM B117 criteria. Construction features prevent water ingress, allowing G-Series actuators to meet IP 66 and IP 67M specifications and severe high pressure water deluge test • MSS and ISO Valve Mounting The G-Series valve interface meets the dimensional requirements of MSS SP-101 or ISO 5211 defined for each torque range • Operating Ranges G-Series double acting actuators produce guaranteed minimum torque outputs from 10,000 lb-in. up to 6,000,000 lb-in. The spring return units produce spring torques from 2,500 lb-in. to 3,000,000 lb-in. Double Acting G1 Pneumatic Actuator Torque Chart Part No. 3TG100800 Actuator Stroke Model Position G01008 Start/End Minimum Operating Pressure (psig) 80 90 100 Output Torque (in-lbs)

Torque Ratings G Series All published torques are guaranteed minimum values. G Series Pneumatic Double-Acting Actuator Torque Chart Part No. 3TG200900 Actuator Stroke Model Position G2009 Start/End Minimum Start/End Minimum Start/End Minimum Start/End Minimum Start/End Minimum Start/End M inimum Start/End Minimum Start/End Minimum Start/End Minimum Start/End Minimum Operating Pressure (psig) 80 90 100 Output Torque (in-lbs) SpringReturn G1 Pneumatic Actuator Torque Chart Spring Return G1 Pneumatic Actuator Torque Chart Part No. Actuator Model Torque Output Start/Min/End (in-lbs)

Spring Return G1 Pneumatic Actuator Torque Chart Part No. 3TG100802 Actuator Model Torque Output Start/Min/End (in-lbs) 8443 Spring Torque (in-lbs) Start/Min/End

Torque Ratings G Series All published torques are guaranteed minimum values. Spring Return Spring-Return Actuator Part No. Actuator Model G1 Pneumatic Actuator Torque Chart Operating Pressure (psig) 70 80 90 Torque Output Start/Min/End (in-lbs)

Torque Ratings G Series Spring-Return Actuator (cont.) Part No. Actuator Model Operating Pressure (psig) 70 80 90 Torque Output Start/Min/End (in-lbs)