ASME CLASS 600 FLANGE VALVES Apollo Class 600 Flange Valves Deliver High Performance Features ® Class 600 Valve with 4” bonnet extension STANDARD MATERIALS LIST 87A-F PART Apollo® 87A-F, 88A-F, and 88L-F Series ASME Class 600 flange ball valves are available in Stainless Steel, Carbon Steel and Low Temp Carbon Steel in sizes 1” to 8” (DN25 to DN200). Other alloys such as Alloy 20, Hastelloy, Duplex & Super Duplex, Nickel & Nickel-Copper alloys and Titanium are available upon request. STANDARD FEATURES • • • • • • Cast, machined, assembled, and tested in U.S.A. Fully compliant to ASME B16.34 & API 608 Two Position Locking Device (Valves 6” and smaller) Valves with PTFE Stem Seals will be Adjustable Chevron Style ISO 5211 Mounting Pad Bolt Pattern SS Balls & Stems Available in Carbon Steel Valves (Standard in Low Temp CS & SS Valves) • Slot Vented Ball for Thermal Expansion • Rated up to 150 psig Saturated Steam Except where specifically noted all valves within this family of products include all listed features as standard. • Optional rating to 250 psig Saturated Steam (Requires the -24-80 Options or -38 Option) • API 607 Fire Safe (Requires the -24-80 Options) • Anti-static Grounded Ball and Stem • Blow-out Proof Stem Design • Cast Boss for Bleed / Drain Port • Vacuum Service to 29 inches of Hg • NACE MR0175 (2000) and MR0103 (2003) Compliance Class 600 Valve with Actuator ASTM A351-CF8M Retainer ASTM A351-CF8M Ball ASTM A351-CF8M or ASTM A276 Type 316 Stem ASTM A276 Type 316 Seats Defined by Selected Seat Suffix* Body Seals Defined by Selected Seat Suffix* Stem Seals Defined by Selected Seat Suffix* Stem Bearing Defined by Selected Seat Suffix* Grounding Spring 316 Stainless Steel Packing Gland ASTM A276 Type 316 * -80 (Multiseal) | -90 (Devlon) | - 21 (UHMWPE) | -38 (PEEK) Body Stem Nut Lever & Grip Gland Plate Stops Lock Plate Stop Screws Gland Plate Screws Body Joint Stud Body Joint Nut Lock Washer ASTM A194 Grade 8 316 Stainless Steel w/ Vinyl Grip 316 Stainless Steel ASTM A276 Type 316 302 or 304 Stainless Steel 18-8 Stainless Steel ASTM A193-B8 ASTM A193-B8 Grade B8M ASTM A194-Grade 8 302 or 304 Stainless Steel See tech sheets for full product details ASME B16.5 ”Pipe Flanges and Flanged Fittings” ASME B16.10 ”Face to Face Dimensions of Valves” ASME B16.34 ”Valves - Flanged, Threaded, and Welding End” ASME B31.1 “Power Piping” ASME B31.3 “Chemical Plant and Petroleum Refinery Piping” ASME B31.8 “Gas Transmission and Distribution Piping Systems” API 607 ”Fire Test - Soft Seated Quarter Turn Valves” ASTM A352-LCC Retainer ASTM A352-LCC Ball ASTM A351-CF8M or ASTM A276 Type 316 Stem ASTM A276 Type 316 Balance of components will be the same as 87A-F Material List Body Except where specifically noted all valves within this family of products complies with the requirements of this listed standard. API 608 ”Ball Valves - Flanged, Threaded, and Welding End” MSS SP-25 ”Standard Marking System for Valves” MSS SP-61 ”Pressure Testing of Steel Valves” MSS SP-72 ”Ball Valves with Flanged or Buttweld Ends” NSF-372 Drinking Water System Components - Lead Content NSF/ANSI 61 (2010) Section 8, Annex F & G ASTM A216-WCB Retainer ASTM A216-WCB Ball ASTM A216-WCB or ASTM A108 Stem ASTM A108 Balance of components will be the same as 87A-F Material List STANDARD COMPLIANCE *1" valve is a unibody design NOTE: This drawing and the subject matter disclosed therein is the property of Conbraco Industries, Inc. and is not to be copied, used, appropriated or disclosed to others without the expressed written permission of Conbraco Industries, Inc. CHANGE DESCRIPTION

SALES & CUSTOMER SERVICE: Phone: (704) 841-6000 Fax: (704) 841-6020 To find a Sales Rep in your area, visit our website. www.apollovalves.com/replocator REGIONAL MANAGEMENT – APOLLO VALVES, ELKHART PRODUCTS & LASCO FITTINGS AREAS COVERED EMAIL SENIOR MANAGEMENT Brian Ragone Senior VP - Sales & Marketing [email protected] Don Russell VP Sales - Commercial & Industrial [email protected] REGIONAL SALES DIRECTORS – COMMERCIAL & INDUSTRIAL Mike Bedzyk Central/Northeast [email protected] 614-619-4993 Mitch Davis S. Central/Southeast [email protected] 678-628-4478 Phillip...