Catalogs >
Conbraco Industries >
cat_ABBR141G

cat_ABBR141G
16Pages

Catalog excerpts

butterfly valves Advantages – 141 Series (Apollo InternationalTM) & 145 Series (Assembled & Tested in USA) WD141: One-piece wafer-style, sizes 2” to 12” LD141: Lug valves, sizes 2” to 24” WD145: One-piece wafer-style, sizes 2” to 12” LD145: Lug valves, sizes 2” to 12” Models come equipped with an extended neck providing at least 2” clearance between the valve top plate and pipe flange to allow ease of insulation installation. (1) Body Design Ductile Iron ASTM A536 WD Model: a one-piece wafer design with flange locating holes in larger sizes (8” to 12”) LD Model: valves are full lug with...

Open the catalog to page 3

butterfly valves General Purpose Butterfly Valves – 141 Series & 145 Series 141 Series: Apollo InternationalTM 145 Series: Assembled & Tested in USA Item 1 7a 8 2 7b 3 6 3 4 5 6 7a 7b 8 5 9 10 2 11 Parts List – 141 series & 145 series Description Material Ductile Iron Body ASTM A536 (65-45-12) EPDM* --- or --Seat Buna-N (Nitrile)* --- or --Viton®B* Shaft 416 Stainless Steel ASTM A564 Nickel Plated Ductile Iron ASTM A536 (65-45-12) --- or --Aluminum-Bronze Disc ASTM B148, C95400 --- or --316 Stainless Steel A STM A351, Type CF8M Bushing PTFE Weather Seal EPDM Retainer Steel with Protective...

Open the catalog to page 4

butterfly valves Specifications – 141 Series & 145 Series Design Specifications specifications £ WD (ductile iron, wafer body design) LD (ductile iron, single flange, lug body design) Size Range 141 Series: Apollo InternationalTM WD141 (wafer body design): 2”-12” (DN50 - DN300) LD141 (single flange body design): 2”-24” (DN50 - DN600) £ Designed to fully comply with MSS SP-25, MSS SP-67, and API 609 £ Meets the intent and passed AWWA C-504 Section 5* proof of design tests £ Extended neck to allow up to 2” of insulation £ Dead-End Service: Lug style valves are suitable for end of line service...

Open the catalog to page 5

butterfly valves General Purpose Butterfly Valves – 141 Series & 145 Series WD Model 141 Series: Apollo InternationalTM 145 Series: Assembled & Tested in USA 2” - 12” ØG2 ØH2 45° D L SQUARE MOUNTING PAD ØG ØH E Double-D Shaft Drive C 8" (DN 200) : 2 HOLES, 0.98" DIAMETER 10" (DN 250) : 2 HOLES, 0.98" DIAMETER 12" (DN 300) : 2 HOLES, 0.98" DIAMETER B A ØM ØJ LD Model 2” - 12” Double-D Shaft Drive 6 14” - 24” Shaft Drive: Double-D (14”) Round & Keyed (16” & larger) www.apollovalves.com Customer Service (704) 841-6000

Open the catalog to page 6

butterfly valves Options The following options are available factory installed on any of the LD or WD Series Apollo Butterfly Valves. The LC149 series are available either with the standard 10-position handle or with the optional gear operator on sizes 8” and larger. The other options may be purchased in kit form and installed by the user or distributor. Bare Stem (model code Suffix 0) Select this suffix to specify a butterfly valve without a handle, gear operator or actuator. Ten (10) Position Handle (Suffix 1) The 10 position handle is the most common manual operator for valves 8” and...

Open the catalog to page 10

butterfly valves Applications The Apollo® LD/WD Series Ductile Iron Butterfly Valves offer reliable performance in a wide range of applications; on/off, throttling, control isolation, flow balancing and diversion. Ideal for use in Industrial and HVAC/Mechanical applications. Service compatibility is dependant on several factors; the corrosion resistance of the disc and shaft and the chemical resistance of the seat (liner) and required temperature range. Erosion resistance also affects material selection when dealing with abrasive slurries. EPDM Cartridge Style Seat Ethylene propylene rubber...

Open the catalog to page 11

butterfly valves Installation Apollo® butterfly valves are designed for installation between ANSI Class 125/150 lb. weld-neck or slip-on flanges. While we suggest use of weld neck flanges, Apollo® models are configured to also accept slip-on flanges that eliminate failures associated with conventional butterfly valves. Be sure to properly align flange and valve when using raised face flanges. Type C stub end flanges are not recommended. Apollo butterfly valves can be used with schedule 40 and schedule 80 steel pipe. When the valve is properly centered between flanges, the disc of an open...

Open the catalog to page 12

butterfly valves Contractor Grade Butterfly Valves – 149 Series The Apollo® LC149 Series Cast Iron Butterfly Valves are ideal for use in Industrial and HVAC/Mechanical applications. The LC149 Series is a lug style valve designed to be economical yet full featured. standard materials Body Cast Iron, ASTM A126 Class B Disc Aluminum Bronze, ASTM B148-C95400 Shaft Stainless Steel, ASTM A276, Type 416 Seat Black EPDM (FDA food grade) with phenolic backing Bushings PTFE Stem Seal EPDM performance rating • Max Operating Pressure: 200 psi (13.8 bar) • Temperature Range: -30°F to 275°F (-34°C to...

Open the catalog to page 13

butterfly valves How to Order WD and LD Butterfly Valves model Number: WD 141 model Series WD Wafer Body 141 Apollo Ductile Iron InternationalTM LD Lug Body Ductile Iron 145 Assembled & Tested in USA 06 B Size (in.) Disc Material 02 2” B Aluminum Bronze D Ductile Iron A536 25 2.5” 03 3” Nickel Plated S Stainless Steel, 04 4” 05 5” CF8M 06 6” 08 8” 10 10” 12 12” 14 14” * 16 16” * 18 18” * 20 20” * 24 24” * E Seat Material E Black EPDM ** -30°F to 275°F -34°C to 135°C N Black BUNA-N ** 10°F to 180°F -12°C to 82°C V Black Viton® B -15°F to 400°F -26°C to 204°C 1 1 Operator 0 Bare Shaft 1 10...

Open the catalog to page 14

butterfly valves Warranty and Limitations of Liability other apollo literature for your specification library Commercial Products Catalog All Products Catalog Industrial Products Binder Conbraco Industries, Inc. warranties, to its initial purchaser only, that its products which are delivered to the initial purchaser will be of the kind described in the order or pricelist and will be free of defects in workmanship or material for a period of TWO years from the date of delivery to you, our initial purchaser. Should any failure to conform to this warranty appear within two years after the date...

Open the catalog to page 15