Pneumatic Actuators Apollo® Rack & Pinion Designed and manufactured for the ultimate in durability and reliability, the new Apollo® Pneumatic Rack & Pinion Actuators provide outstanding service life. Apollo Actuation’s new Rack & Pinion actuator reintroduces the replaceable insert drive adapters in all but the largest models. Many units retain dual “F” series bolt patterns and this combination of features will facilitate direct mounting of several valve styles. BENEFITS ✓ Compact Rack & Pinion Design ✓ Quarter-Turn Operation ✓ Designed for use on a variety of Valve Types; Ball Valves, Butterfly Valves, Plug Valves ✓ Applicable to Damper and Door Openers ✓ Thirteen Distinct Sizes ✓ Both Single Stop and Double Stop Versions** ✓ Both Double-Acting and Spring-Return Units ✓ Double-Acting Torque Outputs from 119 in-lbs to 40273 in-lbs with an 80 psi Air Supply 1. Cast Aluminum Body ✓ Removable/Replaceable Drive Inserts* Yellow Chromate Coated Polyester Powder Coat Finish 2. Die Cast Aluminum End Caps Yellow Chromate Coated Polyester Powder Coat Finish 3. Die Cast Aluminum Pistons Yellow Chromate Coated 4. Aluminum Alloy Pinion ✓ Pre-loaded Spring Assemblies 7075-T6 Hard-coat Anodized Finish ✓ ISO 5211 Valve Mounting ✓ NAMUR (VDI/VDE) Accessory Mounts ✓ ATEC Classification II, 2 GD, Zones 1 or 2 Extruded Aluminum Hard-coat Anodized Finish (Gases) and 21 or 22 (Dust) ✓ Anti Blow-Out Pinion Design ✓ Maximum Pressure Rating: 116 psig (8 bar) 6. Preloaded Concentric Springs ✓ Compatible Media: Clean, Dry Air, Filtered Non- corrosive Gas or Light Hydraulic Oil ✓ Pre-lubricated for the life of the Actuator ✓ Chromate Corrosion Protection on all Molybdenum Disulfide filled Polyamide Aluminum Components 8. Bushings ✓ Each Unit is Serialized Polyoxymethylene (POM) 9. O-Ring Seals Standard Temp. (-4°F to 180°F): Buna-N High Temp. (-4°F to 250°F): Fluorocarbon Low Temp. (-40°F to180°F): Silcone 10. Capscrews, Nuts & Other Hardware 304 Stainless Steel ✓ 5 Year Apollo Warranty Notes: * A wide selection of standard inserts is available for Square, DIN and Double-D drives. ** Single Stop units are used where the open position of the valve requires precise adjustment. These are standard on all actuators with the exception of the two larger sizes where single stops are optional. Actuators with dual adjustable stops are also available for those applications on butterfly valves, for example, to allow precise

101 (1) Guide Band 111 (2) Piston Guide 12 (1) Lower Bearing 211 (1) Thrust Washer 221 (2) Stop Screw Washer 231 (2) Stop Screw Washer 251 (2) End Cap O-ring 261 (2) Piston O-ring 271 (1) Upper Pinion O-ring 281 (1) Lower Pinion O-ring 291 (2) Stop Screw O-ring 301 (2) Stop Screw O-ring 34 (2) Stop Screw Washer 37 (2) Limit Stop Bolt 491 (1) Dual Stop O-ring 501 (1) Dual Stop Washer 51 (1) Dual Stop Lock Nut

21* (1) Thrust Washer 23 (2 or 4) Rack Capscrew

Rack & Pinion Actuator Envelop Dimensions (Inches) * Applies to double stop versions only

Rack & Pinion Actuator Drive Details