AD & AS ACTUATORS SIZES 0025 TO 0600 APOLLO RACK & PINION Designed and manufactured for the ultimate in durability and reliability, the new Apollo® Pneumatic Rack & Pinion Actuators provide outstanding service life. Apollo® Rack & Pinion actuators have replaceable insert drive adapters in all but the largest models, and many units have dual “F” series bolt patterns. The numerous actuator drive and bolt pattern combinations allow direct mounting of several valve styles. • Cast Aluminum Body Yellow Chromate Powder Coat Finish • Die Cast Aluminum End Caps Yellow Chromate Powder Coat Finish • Die...

industrial.apollovalves.com Customer Service (704) 841-6000

Note: DA = Double-Acting, SR = Spring-Return Solenoid interface and top mounting interface according to VDI/VDE3845 (NAMUR) The solenoid drilling pattern is shifted 0.16” for size 0025 and 0.08” for size 0040 vs. the centerline of the actuator. Customer Service (704) 841-6000 www.apolloflowcontrols.com

Note: Flange and square drive according to DIN 3337 TORQUE OUTPUT OF DOUBLE ACTING RACK & PINION ACTUATORS (IN - LB) ACTUATOR SIZE Spring Stroke Rotation Counter Clockwise industrial.apollovalves.com Customer Service (704) 841-6000

Customer Service (704) 841-6000 www.apolloflowcontrols.com

ACTUATOR WEIGHT OPERATING SPEED RESULTS (SEE TEST CONDITIONS BELOW) Flow Controls

AD & AS ACTUATORS SIZES 0600 TO 1600 APOLLO RACK & PINION Designed and manufactured for the ultimate in durability and reliability, the new Apollo® Pneumatic Rack & Pinion Actuators provide outstanding service life. Apollo® Rack & Pinion actuators have replaceable insert drive adapters in all but the largest models, and many units have dual “F” series bolt patterns. The numerous actuator drive and bolt pattern combinations allow direct mounting of several valve styles. • Cast Aluminum Body Yellow Chromate Powder Coat Finish • Die Cast Aluminum End Caps Yellow Chromate Powder Coat Finish • Die...

Flow Controls

Customer Service (704) 841-6000 www.apolloflowcontrols.com

FOR MODELS WITH DUAL ADJUSTABLE LIMIT STOPS RACK & PINION ACTUATOR ENVELOPE DIMENSIONS - INCHES *Applies to double stop versions only

RACK & PINION ACTUATOR DRIVE DETAILS - INCHES Customer Service (704) 841-6000 www.apolloflowcontrols.com

TORQUE OUTPUT OF DOUBLE ACTING RACK & PINION ACTUATORS (IN - LB)

* No insert adapter options ** Optional double stroke adjustment plate is available for 2500 & 4000 (see price list) Customer Service (704) 841-6000 www.apolloflowcontrols.com

AD & AS ACTUATORS ACTUATOR INSERTS - SIZES 0025 TO 1600 FITS STEMS OF THE FOLLOWING DIMENSIONS ACTUATOR ITEM NUMBER AD/AS 0150/0200/0350/0600 CX04681 AD/AS 0150/0200/0350/0600 (Fits HPBFVs) (Fits HPBFVs) CX04682 Notes: Actutator Inserts ADAPTER,19MM (0.748 SQ,) Item Number Fits Stems of the Following Dimensions Imperial (in) Metric (mm) X-Dimension Y-Dimension X-Dimension Y-Dimension Inserts for op0onal stem sizes or when the actuator is ordered without a factory installed insert. Contact factory for addi0onal configura0ons and pricing. Inserts for optional stem sizes...

10 3B INVESTMENT CAST BODY • Assures manufacturing of other special alloys, such as Monel UNIQUE DRIVE PINION • One piece stainless steel alloy shaft, precision machined gear and teeth for precise control BEARINGS • Replaceable top and bottom TFE Pinion Bearings to ensure low friction, stability above 400°F, and chemical resistance TRAVEL STOPS • Provides +/-4° travel adjustment in outboard direction ACCESSORY MOUNTING • Manufactured to NAMUR to provide international standardized mounting STAINLESS STEEL PISTONS • Precision cast pistons are guided through full face engagement with the pinion...

ACUTORQUE STAINLESS STEEL ACTUATORS OPERATION The Apollo® Acutorque actuator is manufactured with an integral and internal air manifold. The solenoid mounting pad is manufactured to Namur dimensional standards as to allow for the direct mounting of various manufacturers’ solenoid valves and other flow control devices. For applications not requiring a direct mount solenoid valve, ports are tapped to NPT standards (American National Standard taper threads). REVERSE ROTATION When required, a clockwise rotation of the drive pinion, by means of air to PORT A can be achieved by reversing the pistons...

CORROSION RESISTANCE All metal components are cast or machined from Stainless Steel or Monel, which offers excellent resistance to most corrosive chemicals as well as industrial atmospheres. NO LUBRICATION All actuators are factory lubricated for the optimum life of the actuator under normal conditions. Teflon® piston bearings are used because of their self-lubricating properties. SIMPLE MAINTENANCE Each actuator is designed for ease of maintenance. Should you wish to change a spring rating or completely rebuild a unit, total disassembly and reassembly is easily performed in just minutes with...

ACUTORQUE STAINLESS STEEL ACTUATORS DIMENSIONAL DATA can we get new drawings from engineering? “Apollo” Flow Controls

Customer Service (704) 841-6000 www.apolloflowcontrols.com

* X in Actuator Model is Spring Set

NAMUR The shaft driven accessory interface conforms to the NAMUR standard and is identical on all G-Series actuators, allowing for standardization of accessory mounting hardware and installation practices • Pneumatic and hydraulic scotch-yoke actuators • Automates ball, butterfly, plug valves and any other 90° rotating mechanisms • Salt Spray Testing per ASTM B117 criteria. Construction features prevent water ingress, allowing G-Series actuators to meet IP 66 and IP 67M specifications and severe high pressure water deluge test. OPERATING RANGES G-Series double acting actuators produce guaranteed...

Flow Controls industrial.apollovalves.com Customer Service (704) 841-6000 ^R-24^