video corpo

W Dryers (15-100)
4Pages

{{requestButtons}}

Catalog excerpts

W Dryers (15-100) - 1

CAROUSEL PLUS DEHUMIDIFYING DRYERS Conair's Carousel Dryers just got better. Dubbed the Carousel Plus - everything about this dryer is improved to help you stay profitable in a dramatically more competitive world market. The product improvements are an extension of the legacy of the original, work- horse Carousel desiccant dryers. Purchase this dryer and you will find that you have more control over drying dewpoint and temperature than ever before, in a package that is simpler, smaller, lighter, more energy efficient, easier to use and maintain than any other dryer on the market today. FLOOR UNIT ON STURDY STEEL CASTERS These small-sized dryers are small enough to be used beside the machine, yet powerful enough for central drying The Carousel Plus Dryers use molecular sieve desiccant that is bonded into a fiberglass substrate and formed into a continuously rotating wheel. The result is rock steady drying temperatures and dewpoint levels, critical for processing moisture and temperature sensitive These units are capable of delivering nominal throughput rates ranging from 10 to more than 100 lb/hour. The thermo-formed, impact resistant ABS cover adds to the good looks and space-saving design of the Carousel Plus Dryers. Models 15-200 are also available in Mobile Drying and Conveying (MDCW) configurations. Reduced energy costs The desiccant wheel assembly heats and cools more easily than previous drying technology saving you up to 35% on your energy bill. Fewer parts, lighter structural mass, less to heat, therefore less wasted energy. Maximum uptime, maximum reliability With significantly reduced part count, easy access and less wear you can expect many years of trouble-free operation. The weight of the desiccant assembly has been reduced by 70%, the part count reduced by 90%, there are no more indexing bed plates, no more cumbersome 4-way valves and no more messy desiccant beads. Shift-after-shift this dryer will deliver the performance you need to stay up Precise, adjustable dewpoint control An industry first! The dewpoint control option built into the microprocessor control system allows you to select a particular dewpoint value, which the control locks onto. The control then adjusts various dryer functions to precisely hold the dew- point selected, virtually eliminating any chance of overdrying expensive material.

Open the catalog to page 1
W Dryers (15-100) - 2

CAROUSEL PLUS DEHUMIDIFYING DRYERS The core of the Carousel Plus Dryer is the Munters8 unique fluted desiccant rotor, which contains molecular sieve desiccant. The molecular sieve has been grown into the rotor's porous fiberglass substrate, preventing the possibility of desiccant break down and dusting over time. The desiccant rotor revolves slowly at the rate of 12 revolutions per hour passing through three cycles with each revolution. The high airflow across the surface area of the rotor produces a resin-drying low dewpoint within five minutes of start-up and offers multi- year media life...

Open the catalog to page 2
W Dryers (15-100) - 3

CAROUSEL PLUS DEHUMIDIFYING DRYERS Six character, seven segment LED display for high visibility of setpoint and actual operat- Full access to setup parame- ters and alarms through error Autostart count down timer Operator password protection English/Metric units Solid-state heater contactors with isolation protection Return air temperature display numeric display with access to set-up parameters, full diagnostics, Eight character, fourteen segment LED display for high visibility of selected parameter status Keypad for easy operator access Real time clock Temperature setback Operator...

Open the catalog to page 3
W Dryers (15-100) - 4

APPLICATION NOTES: All dryers are supplied with an aftercooler as standard. The aftercooler reduces the temperature of the return air from the drying hopper, improving the efficiency of the desiccant. The aftercooler should be connected with the proper water flow rate and temperature to attain the optimal throughput. SPECIFICATION NOTES: * Dryers running at 50 Hz will have 17% less airflow, and a 17% reduction in material throughput. † Total kW listed at a process setpoint of 250°F {121°C} and a regeneration temperature of 350°F {177°C}. When to use additional filtration The standard return...

Open the catalog to page 4

All Conair catalogs and technical brochures

  1. 5000 Blender

    4 Pages

  2. MedLine

    4 Pages

  3. TrueRate™

    3 Pages

  4. TrueWeigh

    6 Pages

  5. INTERMIXER

    2 Pages

  6. Dump Table

    2 Pages

  7. CPC Series

    4 Pages

  8. Medline

    6 Pages

  9. MEDVAC TANKS

    4 Pages

  10. HTR series

    4 Pages

  11. VTR

    4 Pages

  12. TW-V

    4 Pages

  13. TW-S

    4 Pages

  14. TW-P

    4 Pages

  15. TAC series

    2 Pages

  16. WELDED SILOS

    2 Pages

  17. HTMP SERIES

    4 Pages

  18. PTFG

    4 Pages

  19. CFC series

    2 Pages

  20. EP2

    8 Pages

  21. PTSS 0450

    4 Pages

  22. EP1

    6 Pages

  23. FLX-128

    4 Pages

  24. Bolted Silos

    2 Pages

  25. CH Hoppers

    4 Pages