TEMPERATURE CONTROL UNITS4THERMOLATOR TW-S SERIES WATER TEMPERATURE CONTROLLER Re-Engineered for Energy Savings; Increased Performance The new Thermolator TW-S Series takes everything that you loved about Conair’s reliable Thermolators of the past, and improves upon performance and available options. The TW-S offers a wide variety of options and features to make maintaining the process temperature at your required setpoint simple. All models offer incoloy heaters; silicon carbide pump seals; pressure gauges; easy-to-use controls and tool-free access panels for fast removal. The TW-S options include: rotary nonfused disconnect switch, C-UL508A industrial control panel construction, hand-held remote control panel, solid state relay heater controls, brazed plate heat exchangers in two sizes, 300°F maximum operating temperature and vertical unit stacking rack. Save Money Up Front and in the Long Term Units are available in direct injection, or closed circuit cooling; single-zone and dual-zone configurations. Pump sizes to 10 Hp per zone. Heaters to 48 kW per zone. Standard process temperatures to 250°F {121°C}, with a hightemperature option which increases the unit’s capacity to 300°F {149°C}. The TW-S Thermolator was designed to be flexible for your needs. Add as many or as few options as you need. Dual-zone models can control two process temperatures at different locations in a mold. These units have common cooling water manifolds and electrical connections for convenience. Closed circuit units keep the process fluid separated from the cooling water, eliminating cross-contamination and allowing for the use of two different fluid sources. State-of-the-art controls Microprocessor controls offer uniform temperature control regardless of external loading. Status lights, process supply and setpoint values are displayed on the control simultaneously. Built-in features include: cool down sequence, pump running hours count, temperature deviation alarms & warnings, adjustable alarm delay times, toggle to process return temperature, alarm horn & silence switch, error diagnostics and independent start and stop buttons. Energy savings This new generation of Thermolators is much more efficient. Offering a 50% increase in the pump operating envelope, an application that may have previously required a 5 Hp pump may now only require a 2 Hp pump. PLUS, today’s pumps use less energy than their predecessors. Average yearly operating cost savings of the new Thermolators is $740 per unit. Conair Sales can help determine which Thermolator suits your needs. Higher-efficiency pumps More efficient pumps— 36% wire to water to be exact. Sizes from 3/4 Hp to 10 Hp and feature silicon carbide seals and sediment traps for extended seal life. Cast iron impellers are standard; silicon brass impellers are optional. `` Incoloy heaters Made to resist damage from high temperature and chemicals. `` "Casters up" warranty Three full years on all Thermolator TW Series models.

TEMPERATURE CONTROL UNITS4THERMOLATOR TW-S SERIES WATER TEMPERATURE CONTROLLER Features Incoloy heaters minimize chemical and high temperature damage. Three-piece cast construction eliminates potential leak points. Built-in pressure gauges are standard for all Conair TW Series Thermolators. Two-zone models allow independent control of dual cooling zones with the convenience of common cooling water manifolds and electrical connections. High efficiency pumps from 3/4 to 10 Hp. Industry standard cast iron pump impellers on all models. Brass impellers available for non-ferrous applications. Silicon...

TEMPERATURE CONTROL UNITS4THERMOLATOR TW-S SERIES WATER TEMPERATURE CONTROLLER The TW-S Control Control features on the TW-P and TW-V Series Thermolators Control features on the TW-S Series Thermolators Model Direct Injection Closed Circuit Construction Standard Pump Range Standard Heater Range Cast Heater / Pump Incoloy Heaters Silicon Carbide Seals Pressure Gauges Controls PID Control Setpoint / Actual Display Password Protection Modbus RTU via RS-485 SPI via RS-485 Retransmit Process Temp (4-20mA) Hand Held Remote Auto Restart Capability High Temperature Safety Mold Purge Phase Detection Circuit...

TEMPERATURE CONTROL UNITS4THERMOLATOR TW-S SERIES WATER TEMPERATURE CONTROLLER Specifications Models Performance Characteristics Minimum setpoint temperature °F {°C} Maximum setpoint temperature °F {°C} Minimum operating temperature °F {°C} Available pump sizes Available heater sizes Connections to/from process NPT (female) Connections in/out cooling water NPT (female) Pump Performance - Consult your Conair representative for pump performance characteristics at other operating points. Pump Nominal flow gpm {lpm} Pressure@ nominal flow psi {kg/cm2} Dimensions inches {mm} Single Zone (A) Cabinet...