Catalogs >
Conair >
TW-P

TW-P
4Pages

Catalog excerpts

TEMPERATURE CONTROL UNITS4THERMOLATOR TW-P SERIES WATER TEMPERATURE CONTROLLER Cost Savings Starting from Purchase Date, and Continued Daily The Thermolator TW-P Series is designed as the top-of-the-line Thermolator package. The TW-P offers extensive options for maintaining the process temperature with circulated water that has been heated or cooled to the required setpoint. All models offer incoloy heaters; silicon carbide pump seals; pressure gauges; easy-to-use controls and tool-free access panels for fast removal. The TW-P options include: rotary nonfused disconnect switch, C-UL508A industrial control panel construction, hand-held remote control panel, solid state relay heater controls, brazed plate heat exchangers in two sizes, 300°F maximum operating temperature and vertical unit stacking rack. A Premium Control on a Premium Thermolator Units are available in direct injection or closed circuit cooling; single-zone and dual-zone configurations. Pump sizes to 10 Hp per zone. Heaters to 48 kW per zone. Standard process temperatures to 250°F {121°C}, with a hightemperature option which increases the unit’s capacity to 300°F {149°C}. The TW-P Thermolator is designed to offer every premium option available. Options can be included or excluded based on your desired configuration. Dual-zone models can control two process temperatures at different locations in a mold. These units have common cooling water manifolds and electrical connections for convenience. Closed circuit units keep the process fluid separated from the cooling water, eliminating cross-contamination and allowing for the use of two different fluid sources. `` State-of-the-art controls Microprocessor controls with adjustable tuning parameters offer uniform temperature control, regardless of external loading. `` Energy savings The newest generation of TW Series Thermolators is much more efficient. Offering 50% increase in the pump operating envelope, an application that may have previously required a 5 Hp pump may now only require a 2 Hp pump. PLUS, today’s pumps use less energy than their predecessors. Average yearly operating cost savings of the new Thermolators is $740 per unit. Conair sales can help you determine which Thermolator suits your needs. Higher-efficiency pumps More efficient pumps— 36% wire to water to be exact. Sizes from 3/4 Hp to 10 Hp and feature silicon carbide seals and sediment traps for extended seal life. Cast iron impellers are standard; silicon brass impellers are optional. `` Incoloy heaters Made to resist damage from high temperature and chemicals. `` "Casters up" warranty Three full years on all Thermolator TW Series models.

Open the catalog to page 1

TEMPERATURE CONTROL UNITS4THERMOLATOR TW-P SERIES WATER TEMPERATURE CONTROLLER Features Incoloy heaters minimize chemical and high temperature damage. Three-piece cast construction eliminates potential leak points. Built-in pressure gauges are standard for all Conair TW Series Thermolators. Two-zone models allow independent control of dual cooling zones with the convenience of common cooling water manifolds and electrical connections. High efficiency pumps from 3/4 to 10 Hp. Industry standard cast iron pump impellers on all models. Brass impellers available for non-ferrous applications....

Open the catalog to page 2

TEMPERATURE CONTROL UNITS4THERMOLATOR TW-P SERIES WATER TEMPERATURE CONTROLLER Control Power Autostart Signal Pump Heat Cool Coolant Pressure Temperature Limit Flow GPM (flash) Electrical Phase Error Heat Error Process Cool Down Mold Purge Rapid Cool Process Cool Down Mold Purge Rapid Cool Communications Remote Heat/Cool Program Mode The TW-P Control Control features on the TW-S and TW-V Series Thermolators Control features on the TW-P Series Thermolators Model Direct Injection Closed Circuit Construction Standard Pump Range Standard Heater Range Cast Heater / Pump Incoloy Heaters Silicon...

Open the catalog to page 3

TEMPERATURE CONTROL UNITS4THERMOLATOR TW-P SERIES WATER TEMPERATURE CONTROLLER Specifications Models Performance Characteristics Minimum setpoint temperature °F {°C} Maximum setpoint temperature °F {°C} Minimum operating temperature °F {°C} Standard cooling valve size inches {mm} Available pump sizes Available heater sizes Connections to/from process NPT (female) Connections in/out cooling water NPT (female) Pump Performance - Consult your Conair representative for pump performance characteristics at other operating points. Pump Nominal flow gpm {lpm} Pressure@ nominal flow psi {kg/cm2}...

Open the catalog to page 4

TW-P 4Pages

Catalog excerpts

All Conair catalogs and technical brochures

TW-P
4Pages