Catalogs >
Conair >
THERMOLATOR® (TW) SERIES

THERMOLATOR® (TW) SERIES
4Pages

Catalog excerpts

THERMOLATOR® TW SERIES WATER TEMPERATURE CONTROLLER CONSISTENT, RELIABLE TEMPERATURE CONTROL The Thermolator® TW Series is designed to maintain the process temperature with circulated water that has been heated or cooled to the required setpoint. All models offer incoloy heaters; silicon carbide pump seals; pressure gauges; easy-to-use microprocessor controls and tool-free access panels for fast removal. We offer options that include process line purge; a choice of temperature control points; autostart capability; SPI communications; and remotemounted operator panels. THE BROADEST LINE IN THE INDUSTRY Units are available in direct injection, closed circuit or isolated circuit cooling; single-zone and dual-zone configurations. Pump sizes to 7.5 Hp per zone. Heaters to 48 kW per zone. Process temperatures to 250°F {121°C}. Microprocessor controls with adjustable tuning parameters offer uniform temperature control, regardless of external loading. ■ Isolated circuit units keep the process fluid separated from the cooling water, allowing you to use two different fluid sources. High-efficiency pumps Pump sizes range from 3/4 to 7.5 Hp. All feature silicon carbide seals, seal flush lines and sediment traps for extended pump seal life. Drip covers are included to protect the motor from water damage. Stainless steel impellers are standard on 3/4 through 2 Hp pumps. We have a Thermolator® model to fit your application. Dual-zone models can control two process temperatures at different locations in a mold. Two-zone models have common cooling water manifolds and electrical connections for convenience. State-of-the-art controls Incoloy heaters Standard on all models, incoloy heaters resist damage from high temperature and chemicals. “Casters up” warranty Three full years on all Thermolator® TW Series models. And a full four-year warranty on the TW-1 and TW-2 controls.

Open the catalog to page 1

THERMOLATOR® TW SERIES WATER TEMPERATURE CONTROLLER F E AT U R E S Incoloy heaters minimize chemical and high temperature damage. Two-piece cast construction eliminates potential leak points. Built-in pressure gauges are standard for all Conair TW Series Thermolators. Motor drip cover protects motor windings from moisture damage. High efficiency pumps from 3/4 to 7.5 Hp. Stainless steel pump impellers on 3/4 to 2 Hp pumps. Industry standard cast iron pump impellers on 3 Hp to 7.5 Hp models. Silicon carbide pump seals standard on all models. Two-zone models allow independent control of dual...

Open the catalog to page 2

THERMOLATOR® TW SERIES WATER TEMPERATURE CONTROLLER TW-1 CONTROL COOLING TYPE Direct Injection TW PLUS CONTROL TW-1 CONTROL ● ● Closed Circuit Isolated Circuit CONSTRUCTION Standard Pump Range Standard Heater Range Cast Heater / Pump Incoloy Heaters Silicon Carbide Seal Seal Flush Line Pressure Gauges PID Control with auto tune function Setpoint / Actual Display Password Protection Auto Start Capability High Temperature Safety Purge Valve Control Phase Detection Circuit ● Choice of Control Points Remote-Mount Control STATUS / ALARM LIGHTS Panel-mounted status lights Panel-mounted alarm...

Open the catalog to page 3

THERMOLATOR® TW SERIES WATER TEMPERATURE CONTROLLER MODELS Performance Characteristics Minimum setpoint temperature °F {°C} Maximum setpoint temperature °F {°C} Minimum operating temperature °F {°C} Standard cooling valve size inches {mm} Available pump sizes Available heater sizes PUMP PERFORMANCE - Consult your Conair representative for pump performance characteristics at other operating points. Pump 3/4 Hp {0.56 kW} 1 Hp {0.75 kW} 2 Hp {1.49 kW} 3 Hp {2.24 kW} 5 Hp {3.73 kW} Nominal flow gpm {lpm} 40 {151} 45 {170} 55 {208} 80 {303} 100 {379} Pressure@ nominal flow psi {kg/cm2} 17 {1.2}...

Open the catalog to page 4

THERMOLATOR® (TW) SERIES 4Pages

Catalog excerpts

All Conair catalogs and technical brochures

THERMOLATOR® (TW) SERIES
4Pages