Catalogs >
Conair >
Medline

Medline
6Pages

Catalog excerpts

MEDLINE MODELS PULL AND CUT WITH EXTREME PRECISION AND REPEATABILITY Precisely pull and cut small diameter tubing with a puller/cutter unit designed specifically to enhance the production of microbore tubing. This unit is avialable as a belt puller, a pinch roll puller, a cutter, or a combination puller/cutter. The cutter portion of the MedLine is mounted on stainless steel rails with linear bearings that allow the cutter to be moved front-to-back and side-to-side to increase belt life and promote ease of string-up and coiling. Model MDL1-12S:0.25L SIMPLIFIED MICROBORE MEDICAL TUBING PRODUCTION The MedLine cutter models have a digital ■ position-controlled servo motor that allows the unit to achieve up to 350 cuts/minute at 1000 rpm and a park position of ± 0.1 millisecond with real-time repeatability ■ monitoring. The MDL1-12 puller includes either single or dual servo drives with precision planetary gearhead reducers that enhance precise speed control with exceedingly low gear backlash. The puller drive is operated by a digital puller control that allows extremely repeatable velocity profile movements. The MDL2-12 puller is designed specifically for larger extrudates. This puller is standard with a positional servo motor that includes a servo-rated low backlash reducer. An optional digital belt gap sensor, with Ethernet capabilities, is available for both puller models. Precise pulling with servo motors Independent servo motors with precision inline planetary gear reducers provide consistent, repeatable pulling with optimum torque and minimum drive system backlash. Eliminate belt slippage The helical offset tooth design and self-tracking belts on the 1-12 puller provide a highly accurate and efficient puller drive system. Visible processing All pinch rolls and cutters, as well as the 1-12 puller and the 2-12 puller, are equipped with 0.25 inch {6.4 mm} thick polycarbonate window guards that ease the string-up procedure by allowing the user to visually follow the microbore tubing through the pulling and cutting processes. Cutting capacity up to 2.0 inches The 0.25L cutter can handle extrudates of up to 0.25 inches {6.4 mm} in diameter. Optional 1 inch {25 mm} or 2.0 inch {51 mm} cut capacities are available with the larger cutter models. Touch screen control The intuitive, 8-inch digital operator control provides a user-friendly method to communicate with the Conair Combination Puller/Cutter. Optional 10-inch dedicated program screens for taper/bump/bubble tubing ease the setup process. An optional 15-inch control is availab

Open the catalog to page 1

MEDLINE MODELS F E AT U R E S Simple Conveyor Setup Cutting from above the conveyor improves discharge interface. Optimum Eye-level Monitoring Controls are at eye-level and within easy reach. Visible Cutter Head Clear knife guard lets you view the rotating cutter head and blade(s) during operation. Designed for easy access! Precisely Control Belt Tension Adjust puller belts and control tension on your material by opening or closing the belts with an easy turn or servo boom. Wheel or servo control. Digital belt gap sensor also available. Built-in Stainless Steel Particulate/Overflow Tray...

Open the catalog to page 2

MEDLINE MODELS C O N F I G U R AT I O N A N D N A M I N G The MedLine Series can be configured in many different ways to suit your application perfectly. All MedLine models have the same cabinet design. The MedLine can be a medical application puller/cutter combination, a medical puller, or a medical cutter. The model name/number is determined by the configuration that is desired. Pulling information The first digit in the model name following the MDL (MedLine) distinguishes the difference between a belt puller and a pinch roll. If the first digit is a number, the number represents the...

Open the catalog to page 3

MEDLINE MODELS CONFIGURING THE RIGHT MEDLINE FOR YOU Pinch roll 3-1R (3.12 inch diameter, 1.3 inches wide. Maximum opening 4.0 inches. Single servo only.) Cutters available as L-Light weight or H-Heavy Duty Pinch roll 4-2R (4.12 inch diameter, 2.0 inches wide. Maximum opening 3.0 inches. Single servo only.) Cutter 2.00 (2.25 inch bushing diameter) Cutter 1.00 (1.25 inch bushing diameter) 10-inch HMI MedLine control (w/bump tube) Pinch roll 6-3R (6.06 inch diameter, 2.25 inches wide. Maximum opening 3.0 inches. Dual servo only) 15-inch HMI MedLine control (w/bump tube) Puller 3-20 (3 inches...

Open the catalog to page 4

MEDLINE MODELS CONTROL Touch Screen Control features include: ■ Large, easy-to-read display ■ Total access to servo drives for tuning and serviceability ■ Upload and download capabilities ■ Ethernet communications ■ Optional bubble/taper tube screens Digital Belt Gap Sensor This option allows you to set the zero point for the belt gap, and then set and measure belt gap to three decimal places. Puller Remote Control % Torque OPTIONS ■ Stainless steel cabinet ■ Multiple length and batch counts ■ Left-to-right puller motion ■ Follower cutting mode ■ Variable blade speed in both demand Digital...

Open the catalog to page 5

MEDLINE MODELS P U L L I N G C O M P O N E N T S P E C I F I C AT I O N S PINCH ROLL PULLER MODELS Performance characteristics Roller width inches {mm} Roller diameter inches {mm} Feed opening inches {mm} Drive type Roller drive motor Hp {kW} Roller speed* ft/min {m/min} BELT PULLER MODELS Performance characteristics Belt width inches {mm} Belt traction length inches {mm} Feed opening inches {mm} Drive type Belt drive motor Hp {kW} Belt speed ranges* ft/min {m/min} CUTTER MODELS Performance characteristics Extrudate capacity inches {mm} diameter Bushing inches {mm} dia. Blade drive motor Hp...

Open the catalog to page 6

Medline 6Pages

Catalog excerpts

All Conair catalogs and technical brochures

Medline
6Pages