GAYLORD TILTERS SAFELY DIRECTS MATERIALS TO CONVEYOR FEED TUBES Conair Tilters provide a safe method of moving free-flowing materials to one corner of a shipping container for complete emptying by a vacuum loader. They are built tough to withstand heavy use on production floors. The tilters can be used beside your processing machines or in remote central material storage rooms to assure a constant flow of material throughout your plant. Once emptied, simple foot- or hand-operated controls level the container for removal and replacement. 120 Series Raised Platform Tilter FLOOR LEVEL OR RAISED PLATFORM MODELS Gaylord tilters are available for holding containers weighing up to 3,000 pounds. Floor level tilters are either hand or foot operated and can hold containers up to 1500 lb. They can be set for either manual or automatic operation. It can be easily loaded by a hand truck or pallet mover because the box platform is flat on the floor. A heavy-duty air bag device slowly fills with compressed air to automatically tilt the platform and container as it is emptied. An adjustable conveyor feed tube support is included. Raised platform tilters are operated by heavy-duty air cylinders. This type of tilter is adjusted so that it will start lifting the container when less than 500 pounds remain in the box. Then it slowly tips the box to a 45º angle to assure smooth continuous feeding to the vacuum feed tube. Wide capacity range Capacities for 1200 lb, 1500 lb and 3000 lb loads. Prevent material voids Air or electric-operated vibrators are available to prevent material voids. No electricity required Compressed air operated. Automatic or manual operation Tilters can be set for either manual or automatic operation. The tilters will automatically swing up as material is emptied to assure a constant flow of material. 299 Series Floor Level Tilter

GAYLORD TILTERS Gaylord Raised Platform Tilter Gaylord Floor Level Tilter MODELS Performance Characteristics Capacity lb {kg} Tilter type Control type Dimensions inches {mm} A - Height † B - Width Length Weight lb {kg} Shipping Compressed air requirement 2500 {1134} floor level foot 2500 {1134} floor level hand 1200 {544} raised platform foot 3000 {1361} raised platform foot SPECIFICATION NOTES * Allow a minimum of 30 inches on each side of tilter for working area. † Height is 54 inches from the floor with wand holder fully extended. Specifications may change without notice. Check with a Conair...