TPCX008-0811 VACUUM MATERIAL RECEIVERS FILTERLESS (FL) SERIES VERSATILE LOADING FOR MID TO LARGE THROUGHPUT Pellets. Virgin-regrind mixes. Dusty, problem materials. Coarse powders. Conair FilterLess vacuum receivers can handle the job. Model FL-20 hopper loading with optional ELC-16 control The FilterLess vacuum has the ability to convey dusty materials and freeflowing powder larger than 100 microns in diameter. Each Filterless receiver has a patented “filterless insert” that uses continuous reversal of vacuum air to separate incoming material from conveying air without filters or screens. The process provides dramatic air/material separation without relying on filtration. Model FL-10 direct feed with UTB NO FILTER, NO SCREEN, TWIN-CYCLONE ACTION Twin cyclone action allows FilterLess receivers to efficiently load materials without filter blinding or abrasion. The tangential material inlet provides smooth material entry, decreasing material fracturing and dust. Available in both hopper loading and direct feed models, the FilterLess can supply hoppers and surge bins or feed directly to a processing machine throat. Hopper loaders incorporate the demand level switch in the discharge valve. The positive discharge option provides an air driven discharge valve with a rotary demand switch. Direct feed configurations include a choice of glass hopper sizes, equipped with a capacitive demand sensor. An isolator valve option may be included when an airtight seal at the base of the loader cannot be assured. The isolator valve may also provide demand sensing. Fill sensors are provided to terminate the fill cycle and can also provide a no material alarm output. n Choice of discharge Gravity discharge with integral demand switch; air-driven positive discharge with a rotating level sensor or a direct feed glass hopper with level sensor. n Thick-wall, steel construction Cyclone receivers are precision-engineered, in carbon steel or stainless steel. n Built-in vacuum sequencing valve No need for extra wiring or plumbing. n Choice of control Select either the universal terminal box (UTB) or the new ELC loading control for your receiver. The standard UTB works with B-32, IL-64, FLX or ILS central loading controls. The optional ELC control is a stand-alone loading control based on a receiver integrated CAN open network. See the Easy Loading Control (ELC) specification sheet for more information. n Simple, no-tools clean out Material changes are fast and easy with quick-release latches on the receiver lid, and the drop-in filterless insert. No filters, no screens.

VACUUM MATERIAL RECEIVERS TPCX008-0811 FILTERLESS (FL) SERIES S P E C I F I C AT I O N S HOPPER LOADING GRAVITY DISCHARGE A dia. DIRECT FEED POSITIVE DISCHARGE D dia. A D dia. A C C C B B B FL Series Vacuum Receivers Receiver model Receiver diameter inches {mm} Receiver volume ft3 {liters} Material/Vacuum line size range inches {mm}* Available voltages (outputs) Compressed air requirements FL10 10 {254} 0.28 {7.9} 1.5-2 {38-51} FL15 FL20 15 {381} 20 {508} 1 {28.3} 2.3 {65.1} 1.5-2.5 {38-64} 2.25-3 {57-76} 120 VAC, 24 VAC and 24 VDC Intermittent duty: 1 ft3/min. @ 80 psi {28.3 liters/min. @ 5.51...