Catalogs >
Conair >
Economy cooling tank

Economy cooling tank
2Pages

Catalog excerpts

Economy Cooling Tank for Tube, Pipe and Profile ECB Cooling Tanks provide flood cooling or optional spray cooling for profile, tubing, and pipe extrusions up to 6 inches {152 mm}. The internal plumbing for flood cooling has been designed to provide maximum turbulence to break up the warmer water that tends to surround and insulate the product, allowing maximum cooling efficiency. The spray cooling option enhances the heat transfer rate through evaporative cooling. Support and holddown rollers keep the buoyant extrusion in place as it passes through the tank. The extrusion can be held above the water level, or submerged in the water of the spray compartment when the spray option is chosen. Spray or Flood Cooling of Extruded Profiles, Tubing, and Pipe The ECB Tank, constructed using welded, heavy gauge stainless steel, has two compartments: a long water or spray compartment for controlled cooling of the extrusion, and a short air-wipe compartment for removing water from the extrusion surface as it leaves the water or spray compartment. The water and spray compartments are sealed by gaskets on each end. Height adjustment hydraulic jacks at both ends of the tank permit and ensure proper alignment with the extrusion line. Grooved casters and positioning screws also ensure proper tank alignment is maintained. The optional closed water recirculation reservoir, pump, and heat exchanger can interface with your portable chiller or central chiller for reduced water consumption. `` Simplified features in an economy package Vertical adjustment is completed by pumping a pair of hydraulic jacks built into the tank support system. `` Tank lengths from 6 to 30 feet {183 – 914 cm} Cross sections range from 8 x 12 {20 x 31 cm} to 16 x 16 inches {41 x 41 cm}. The wide range of sizes allows you to choose a tank that meets your needs. `` Options to meet your needs • Add a 2 Hp (40 gpm) recirculation system to the 12 or 25 foot lengths, or a 5 Hp (100 gpm) to the 30 foot model. The system includes a brazed plate heat exchanger, reservoir, and strainer filter. • An advanced filtration system with flush capabilities can also be supplied • An array of 4, schedule 80 PVC water distribution manifolds with brass spray nozzles for advanced evaporative cooling • CE certification • UL certification

Open the catalog to page 1

TPEX037-0317 COOLING TANKS 4 ECB SERIES TPEX037-0317 COOLING TANKS 4 ECB SERIES Pumps Number of compartments Size - Cooling / Air wipe ft. {mm} A - Overall height B - Height to centerline C - Overall length D - Tank length ft {m} E - Overall width Tank compartment width* Tank compartment height 55 {1397} 42 {1067} Centerline height is adjustable ± 2 inches {50.8 mm}

Open the catalog to page 2

Economy cooling tank 2Pages

Catalog excerpts

All Conair catalogs and technical brochures

Economy cooling tank
2Pages